{"product_id":"fervi-trapano-a-colonna-con-trasmissione-a-cinghia-0752cm3","title":"Belt-driven pillar drill Fervi 0752CM3","description":"\u003ch2\u003eBelt-driven pillar drill Fervi 0752CM3\u003c\/h2\u003e\n\u003ch3\u003eWhat it is\u003c\/h3\u003e\n\u003cp\u003eThe Fervi 0752CM3 belt-drive pillar drill is a workshop machine for drilling metals with an MT 3 Morse taper, which widens compatibility with taper-shank tools. It offers a continuous drilling capacity of up to Ø 16 mm and, with a pilot hole, up to Ø 20 mm on S235JR steel and Ø 25 mm on cast iron. The 1 to 16 mm B18 chuck and the 16 spindle speeds from 220 to 2840 rpm ensure machining flexibility, while the table, tiltable by ± 45° and measuring 290 x 290 mm, makes it easier to position the workpiece.\u003c\/p\u003e\n\u003cp\u003eA pillar drill is a stationary drilling machine on a column or magnetic base for accurate, perpendicular holes; this category also includes chucks and drill vices.\u003c\/p\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eUsed for drilling steel, stainless steel and aluminium, on a pillar drill or with a hand-held drill and in workshop machining of steel, aluminium and alloy parts.\u003c\/p\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003cp\u003eClamp the workpiece in the vice, or fix the magnetic base to clean steel; never hold the workpiece by hand. Fit the bit in the chuck and tighten it firmly, set the speed according to diameter and material and drill with a steady feed, using coolant on metals. Wear safety glasses, no gloves near the chuck, and keep sleeves and hair tied back.\u003c\/p\u003e\n\u003ch3\u003eWhere it is used\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eMechanical engineering industry\u003c\/li\u003e\u003cli\u003eMechanical workshops\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCast iron drilling capacity with pilot hole (mm):\u003c\/strong\u003e Ø 25\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMaximum drilling capacity in steel with pilot hole, S235JR (mm):\u003c\/strong\u003e Ø 20\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eContinuous drilling capacity (mm):\u003c\/strong\u003e Ø 16\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMorse taper:\u003c\/strong\u003e CM 3\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eChuck:\u003c\/strong\u003e 1 - 16 mm B18\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSpindle speed:\u003c\/strong\u003e (16) 220 – 2840 rpm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSpindle travel (mm):\u003c\/strong\u003e 80\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCollar (mm):\u003c\/strong\u003e Ø 47\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eColumn (mm):\u003c\/strong\u003e Ø 80\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHeight (mm):\u003c\/strong\u003e 1630\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSpindle axis to column distance (mm):\u003c\/strong\u003e 175\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDistance between machine nose and table (mm):\u003c\/strong\u003e 420\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDistance between machine nose and base (mm):\u003c\/strong\u003e 1190\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTable dimensions (mm):\u003c\/strong\u003e 290 × 290\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWho it is for\u003c\/h3\u003e\n\u003cp\u003eDesigned for industrial maintenance technicians and mechanics.\u003c\/p\u003e\n\u003ch3\u003eRelated products\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/fervi-trapano-a-colonna-con-trasmissione-a-cinghia-0754-230v\"\u003eBelt-driven pillar drill Fervi 0754\/230V\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/fervi-trapano-a-colonna-con-trasmissione-a-cinghia-0752\"\u003eBelt-driven pillar drill Fervi 0752\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/dewalt-dt4919-qz\"\u003eCobalt HSS-E drill bits 2.5mm loose x10 DeWalt DT4919-QZ\u003c\/a\u003e \u0026mdash; from the category \u003ca href=\"\/en\/collections\/punte-per-metalli\"\u003eMetal Drill Bits\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/fervi-sega-a-carotare-lunga-con-attacco-weldon-f002-30l\"\u003eLong Weldon-shank core drill Fervi F002\/30L\u003c\/a\u003e \u0026mdash; from the category \u003ca href=\"\/en\/collections\/seghe-a-tazza-e-frese-circolari-professionali-per-legno-metalli-pvc-fibra-e-cartongesso\"\u003eProfessional Hole Saws and Hole Cutters\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/occhiali-monolente\"\u003eSingle-lens glasses\u003c\/a\u003e \u0026mdash; from the category \u003ca href=\"\/en\/collections\/occhiali-maschere-occhi-e-visiere-protettive-per-il-viso\"\u003eSafety Glasses, Goggles and Face Shields\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003eBrowse the whole category: \u003ca href=\"\/en\/collections\/trapani-a-colonna\"\u003ePillar Drills\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\n\u003cp\u003eTell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.\u003c\/p\u003e\n\u003cp\u003eFor prices and availability, \u003cstrong\u003erequest a quote from AMES Srl\u003c\/strong\u003e: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.\u003c\/p\u003e","brand":"Fervi","offers":[{"title":"Standard","offer_id":57701492982092,"sku":"0752CM3","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0926\/9864\/0716\/files\/0752CM3_4797c4bf-eab1-4107-aa95-2fdf16bae3a9.jpg?v=1783132043","url":"https:\/\/www.amesworldwide.com\/products\/fervi-trapano-a-colonna-con-trasmissione-a-cinghia-0752cm3","provider":"A.M.E.S. srl","version":"1.0","type":"link"}