{"product_id":"fervi-trapano-fresa-da-banco-ad-ingranaggi-t058","title":"Geared bench mill-drill Fervi T058","description":"\u003ch2\u003eGeared bench mill-drill Fervi T058\u003c\/h2\u003e\n\u003ch3\u003eWhat it is\u003c\/h3\u003e\n\u003cp\u003eThe Fervi T058 is a compact gear-drive bench drilling and milling machine, suited to workshops, advanced hobbyists and small shops that need precise metalworking in limited space. It drills S235JR steel up to Ø 13 mm with a pilot hole, mills up to Ø 30 mm with an insert cutter (Ø 16 mm with a cylindrical cutter) and has a Morse taper CM 3 connection with a B16 chuck from 3 to 16 mm. The two speed ranges cover 50 to 1100 rpm and 120 to 2500 rpm (± 10%); the head travel is 210 mm and the head tilts by ± 45°. The 0.55 kW motor runs on 230 V (50\/60 Hz).\u003c\/p\u003e\n\u003cp\u003eA pillar drill is a stationary drilling machine on a column or magnetic base for accurate, perpendicular holes; this category also includes chucks and drill vices.\u003c\/p\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eUsed for drilling steel, stainless steel and aluminium, on a pillar drill or with a hand-held drill, for milling faces, shoulders and slots on machine tools and in workshop machining of steel, aluminium and alloy parts.\u003c\/p\u003e\n\u003ch3\u003eHow to use it\u003c\/h3\u003e\n\u003cp\u003eClamp the workpiece in the vice, or fix the magnetic base to clean steel; never hold the workpiece by hand. Fit the bit in the chuck and tighten it firmly, set the speed according to diameter and material and drill with a steady feed, using coolant on metals. Wear safety glasses, no gloves near the chuck, and keep sleeves and hair tied back.\u003c\/p\u003e\n\u003ch3\u003eWhere it is used\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eMechanical engineering industry\u003c\/li\u003e\u003cli\u003eMechanical workshops\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003cstrong\u003eMaximum drilling capacity in steel with pilot hole, S235JR (mm):\u003c\/strong\u003e Ø 13\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRouting capacity with insert cutter (mm):\u003c\/strong\u003e Ø 30\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRouting capacity with cylindrical cutter (mm):\u003c\/strong\u003e Ø 16\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMorse taper:\u003c\/strong\u003e CM 3\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eChuck:\u003c\/strong\u003e 3 ÷ 16 mm B16\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSpindle speed:\u003c\/strong\u003e I 50 ÷ 1100 rpm ±10% | II 120 ÷ 2500 rpm ±10%\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSpindle rotation:\u003c\/strong\u003e Dx\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHead travel (mm):\u003c\/strong\u003e 210\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHead tilt:\u003c\/strong\u003e ±45°\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTable size:\u003c\/strong\u003e 430 x 110 mm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDistance between machine nose and table (mm):\u003c\/strong\u003e 290\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eGroove (mm):\u003c\/strong\u003e 12\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLongitudinal table movement (mm):\u003c\/strong\u003e 130\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCross table movement (mm):\u003c\/strong\u003e 250\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWho it is for\u003c\/h3\u003e\n\u003cp\u003eDesigned for industrial maintenance technicians and mechanics.\u003c\/p\u003e\n\u003ch3\u003eRelated products\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/fervi-trapano-fresa-da-banco-ad-ingranaggi-t059-16v\"\u003eGeared bench mill-drill Fervi T059\/16V\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/fervi-trapano-fresa-da-banco-ad-ingranaggi-t044-400v\"\u003eGeared bench mill-drill Fervi T044\/400V\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/dewalt-dt4928-qz\"\u003eCobalt HSS-E drill bits 4.8mm loose x10 DeWalt DT4928-QZ\u003c\/a\u003e \u0026mdash; from the category \u003ca href=\"\/en\/collections\/punte-per-metalli\"\u003eMetal Drill Bits\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/fervi-sega-a-tazza-bimetallica-a-dentatura-variabile-0278-016\"\u003eBimetal hole saw, variable pitch, Fervi 0278\/016\u003c\/a\u003e \u0026mdash; from the category \u003ca href=\"\/en\/collections\/seghe-a-tazza-e-frese-circolari-professionali-per-legno-metalli-pvc-fibra-e-cartongesso\"\u003eProfessional Hole Saws and Hole Cutters\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/162101-5x8-clear-plus\"\u003ePolycarbonate safety spectacles 5X8-CLEAR Plus Neri 162101\u003c\/a\u003e \u0026mdash; from the category \u003ca href=\"\/en\/collections\/occhiali-maschere-occhi-e-visiere-protettive-per-il-viso\"\u003eSafety Glasses, Goggles and Face Shields\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003eBrowse the whole category: \u003ca href=\"\/en\/collections\/trapani-a-colonna\"\u003ePillar Drills\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eBefore you order\u003c\/h3\u003e\n\u003cp\u003eTell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.\u003c\/p\u003e\n\u003cp\u003eFor prices and availability, \u003cstrong\u003erequest a quote from AMES Srl\u003c\/strong\u003e: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.\u003c\/p\u003e","brand":"Fervi","offers":[{"title":"Standard","offer_id":57701505990988,"sku":"T058","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0926\/9864\/0716\/files\/T058_b8f27a8e-88de-4582-9d46-e49670ade6a9.jpg?v=1783132427","url":"https:\/\/www.amesworldwide.com\/products\/fervi-trapano-fresa-da-banco-ad-ingranaggi-t058","provider":"A.M.E.S. srl","version":"1.0","type":"link"}