Tip 4.0 mm Makita 191F80-4

What it is

Tip 4.0 mm Makita 191F80-4. Key specifications: diameter (mm) 4, drawbar pin diameter (mm) 2,2 - 2,6, rivet type Pull-cord type.

The nosepiece is the spare part fitted to the head of the riveter and matched to the diameter of the rivet to be set.

What it is for

Used for assembling steel structures and for mechanical fixing of structures and components to walls, ceilings and floors.

How to use it

Choose the nosepiece of the size corresponding to the rivet. To change it, disconnect the battery or power supply, unscrew the fitted one and screw on the new one, tightening it well. Replace a worn or deformed nosepiece.

Where it is used

• Mechanical engineering industry
• Mechanical workshops

Technical data

• Diameter (mm): 4
• Drawbar pin diameter (mm): 2,2 - 2,6
• Rivet type: Pull-cord type

Who it is for

Designed for mechanics.

Related products

• Tip 4.8 mm Makita 191F79-9
• Rivet-stem guide, Makita
• Rivets Blinky, aluminium, wide head, boxes of 1000, 4x12 mm, Vigor — from the category Blind Rivets
• HSS-G drill bits DIN 338 for metal 6 mm, single pack in blister DeWalt DT5216-QZ — from the category Metal Drill Bits
• Power Supply DC4002, Makita 630E59-9 — from the category Power Tool Batteries and Chargers
• Browse the whole category: Corded and Cordless Rivet Tools

Before you order

In your request, please state the diameter and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.