Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.

Galvanised hex concrete screw BLUE-TIP 2 DeWalt DFM143005S
Key features
- Typeone-piece concrete screw with hex head and washer (SCREW-BOLT)
- Finishgalvanised
- Installationwith impact driver, removable and reinstallable in the same hole
- StandardETA (depending on size)
What it is
Concrete screw BLUE-TIP 2 hex head galvanised DeWalt DFM143005S is part of the Blue-Tip screws range.
A concrete screw is a screw anchor that is driven directly into the hole in concrete or masonry, cutting its own thread, without a plug.
What it is for
Used for anchoring shelves, brackets and structures to walls and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Drill with a bit of the diameter specified for the screw to the required depth and clean the hole thoroughly. Drive the screw through the part being fixed with a spanner or impact driver until it is seated, without overtightening. Observe the edge distances and hole spacings stated in the technical data sheet.
Where it is used
- Industrial construction
- Residential construction
Technical data
- Type: one-piece concrete screw with hex head and washer (SCREW-BOLT)
- Finish: galvanised
- Installation: with impact driver, removable and reinstallable in the same hole
- Standard: ETA (depending on size)
Who it is for
Designed for electricians, metal fabricators and plumbers.
Related products
- Galvanised hex concrete screw BLUE-TIP 2 DeWalt DFM143008S
- Galvanised hex concrete screw BLUE-TIP 2 DeWalt DFM143004S
- SDS-plus Extreme bit 6x110x50mm DeWalt DT9514-QZ — from the category Drill Bits for Granite, Masonry and Concrete
- Compact cordless impact driver 1/4" drive XR 18 V 2x2.0 Ah DeWalt DCF809D2T-QW — from the category Impact Drivers (Hex Drive)
- Magnetic hex socket 50mm DeWalt DT7404-QZ — from the category Impact Sockets
- Browse the whole category: Concrete Screws (Screw Anchors)
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 5
| Item code | DFM143005S |
|---|---|
| Type | one-piece concrete screw with hex head and washer (SCREW-BOLT) |
| Finish | galvanised |
| Installation | with impact driver, removable and reinstallable in the same hole |
| Standard | ETA (depending on size) |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Transmit the torque of the impact driver to nuts and bolts without breaking.
Drill concrete, masonry and stone by combining rotation and hammer action.
Drive and remove stubborn screws and bolts with rotary impacts, using bits or sockets.




