Skip to content
0 Quotes 0Compare
All Wortex products

Submersible electric pumps JDX-JVX Wortex

Key features

  • Maximum liquid temperature35°C
  • Max immersion depth (m)5
  • Solids passage, JDX 600 (mm)Ø 3
  • Solids passage, JVX 1000 (mm)Ø 20
  • Minimum suction level, JDX 350 (mm)2
  • Minimum suction level, JDX 600 (mm)30
See all 18 specifications

What it is

Submersible electric pumps JDX-JVX Wortex. Key specifications: maximum liquid temperature 35°C, max immersion depth (m) 5, solids passage, JDX 600 (mm) Ø 3.

A submersible drainage pump is a pump that is immersed to empty flooded excavations, basements, sumps and tanks, handling clear, cloudy or waste water depending on the model.

What it is for

Used for water drainage and for pumping water out of excavations, tanks and sumps.

How to use it

Lower it to the lowest point hanging from its handle on a rope or chain, never by the cable, and stand it on a firm base or a raised support so it does not draw in mud. Connect the delivery hose laid out without kinks and set the float or level sensor for automatic start. Never run it dry, and clean the suction strainer after use.

Where it is used

  • Building services
  • Water engineering works
  • Civil protection

Technical data

  • Maximum liquid temperature: 35°C
  • Max immersion depth (m): 5
  • Solids passage, JDX 600 (mm): Ø 3
  • Solids passage, JVX 1000 (mm): Ø 20
  • Minimum suction level, JDX 350 (mm): 2
  • Minimum suction level, JDX 600 (mm): 30
  • Minimum suction level, JVX 1000 (mm): 30
  • Motor protection: Overload with automatic reset
  • Capacitor: Permanent split capacitor
  • Insulation: Class F
  • Protection: IP68
  • Handle: Moplen
  • Pump body: Stainless steel AISI 304
  • Impeller: Noryl

Who it is for

Designed for plumbers.

Related products

Before you order

Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.

Quantity
Specifications 18
Maximum liquid temperature35°C
Max immersion depth (m)5
Solids passage, JDX 600 (mm)Ø 3
Solids passage, JVX 1000 (mm)Ø 20
Minimum suction level, JDX 350 (mm)2
Minimum suction level, JDX 600 (mm)30
Minimum suction level, JVX 1000 (mm)30
Motor protectionOverload with automatic reset
CapacitorPermanent split capacitor
InsulationClass F
ProtectionIP68
HandleMoplen
Pump bodyStainless steel AISI 304
ImpellerNoryl
Motor casingStainless steel AISI 304
Shaft with rotorStainless steel AISI 304
Cable (m)10
Regulations and certificationsEN 60335-2-41 (also generic references to GDPR/EU Regulation 679/2016, not relevant to the product)

The perfect setup for this job

Everything you need in one place, from functionality to safety.

For the job

For safety