Supplies for Industrial Construction
6585 products
This collection brings together supplies for the industrial construction sector: warehouses, factories and works at height where secure fixings, fall protection and temporary site electrical systems are needed. The catalogue includes items from Portwest, Fischer, Irudek, Petzl, Friggeri, Neri and DeWalt.
What you will find
- Fixings and anchors: sleeves, screws, wall plugs and hooks for sheet metal and structures.
- Fall protection: retractable fall arresters, anchor points and devices for working at height.
- Electrical systems: CEE industrial sockets, plugs and extension leads.
- Clothing and PPE: jackets, protective equipment and respiratory protection devices.
- Machines and accessories: site vacuum cleaners, chemical anchor guns and site radios.
How to choose
For fixings, start from the base material and the load to be supported. For fall protection devices, the working height and the type of structure matter. Sockets and plugs must match the voltage, current and degree of protection required by the installation.
For availability, delivery times and terms, write to us at info@amessrl.com or call 051 728529: we will prepare a tailored quotation for you.
Products in this collection
Big bag frame in galvanised steel with bag support grid 1070x1070x1265 mm Carvel
UN-approved big bag for asbestos and hazardous waste 1000 L 900x900x1200 mm Carvel
Frequently asked questions: Supplies for Industrial Construction
Which fixings should I use for sheet metal and structures in an industrial building?
For sheet metal, screws, hooks and bushes are used, while structures and masonry need wall plugs sized for the load. The screw material should be chosen according to the environment: in damp or outdoor areas, stainless or galvanised steel is preferable. Always check length, diameter and type of substrate before installing.
Which fall arrest kit do I need to work from an aerial work platform?
The fall arrest kit for aerial work platforms includes a harness and a 2-metre work restraint lanyard. The harness must comply with standard EN 361, and the lanyard must be attached to the anchor point specified by the platform manufacturer. Before every use, check the stitching, the buckles and the condition of the lanyard.
What is the difference between a release agent, a curing compound and an accelerator for concrete?
The release agent makes it easier to separate the formwork from the cast concrete, the curing compound reduces water evaporation during curing, and the accelerator speeds up setting. Each product has a specific use: choose according to the stage of the pour and the type of formwork, and read the technical data sheet for dosages and instructions for use.
How do I choose a CEE socket or extension lead for an industrial construction site?
CEE sockets are distinguished by voltage, rated current and number of poles, which are shown on the plug. Before connecting, check that the voltage and current of the extension lead are suitable for the equipment. The connection must be made by competent electrical personnel, in accordance with the standards for construction site electrical installations.
Which flood barriers are available to protect a room?
The catalogue includes modular barriers with stackable profiles, such as the MODU Rapid with handle bar, and single-panel solutions or ones with a removable leaf. The choice depends on the height of the water to be held back, the width of the threshold and the type of access. Before installation, measure the threshold and follow the manufacturer's fitting instructions.
Who uses these supplies and on which construction sites?
Supplies for industrial construction are used by contractors building industrial sheds, plant maintenance technicians and electrical installers. You will find fixings, fall protection, concrete products and components for construction site installations. For the equipment of a specific site, it is best to request a quote, stating the job, dimensions and quantities.
How do I use a fall arrest device safely when working at height?
Before climbing, check that the anchor is fixed to a suitable structure and that the harness is intact. Use a lanyard of suitable length and do not work with excessive slack. Anyone working at height must be trained, and the fall protection obligations are set out in D.Lgs. 81/2008 (Italian Legislative Decree 81/2008 on workplace safety), to be applied together with the safety plan.
Which earthing rods do I need for a construction site installation?
The hot-dip galvanised steel earthing rod, with a 50x50x5 mm profile, is available in lengths of 100 or 150 cm. The length should be chosen based on the soil resistivity and the instructions of the system designer. Installation and testing of the earthing must be entrusted to a qualified installer, in accordance with Italian CEI standards.
























