A.M.E.S. srlCarbide bits 'mega U'
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.
Accessories collection:Drill Bits for Granite, Masonry and ConcreteRotary Hammers (or Hammer Drills)Chemical Anchors
All A.M.E.S. srl products
Anchor ttsc
Key features
- MaterialGalvanised steel
- FinishGalvanised
What it is
Anchor ttsc. Key specifications: material Galvanised steel, finish Galvanised.
Heavy-duty fixings are steel or reinforced nylon anchors that carry high loads in concrete and solid masonry.
What it is for
Used for mechanical fixing of structures and components to walls, ceilings and floors.
How to use it
Drill with a bit of the specified diameter to the required depth, then clean the hole with a brush and blow-out pump. Insert the anchor through the part to be fixed, hammering it in if necessary, and tighten the nut with a torque wrench to the torque specified by the manufacturer. Observe the minimum edge distances and spacings stated in the technical data sheet.
Where it is used
- Residential construction
Technical data
- Material: Galvanised steel
- Finish: Galvanised
Who it is for
Designed for formwork carpenters and electricians.
Related products
- Guide for fitting plugs TBB TBZ 2
- Anchor GBK
- Twister SDS-Plus bits — from the category Drill Bits for Granite, Masonry and Concrete
- 4-mode rotary hammer RSDS680-KA2 — from the category Rotary Hammers
- Set of combination spanners — from the category Combination Spanners
- Browse the whole category: Heavy-Duty Anchors
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 2
| Material | Galvanised steel |
|---|---|
| Finish | Galvanised |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
A.M.E.S. srlCombination rotary hammer item KH24IXE
Drill concrete, masonry and stone by combining rotation and hammer action.
A.M.E.S. srlSet of combination spanners art. 1031
Tighten and loosen nuts and bolts with the open end or the polygonal ring end.
A.M.E.S. srlGeared chuck SDS plus shank
Drill and chisel concrete and masonry with the quick-release fitting of light rotary hammers.