Progress ProfilesPerimeter profile for raised floors Prosupport Profile N ...Code profile-n
Finish and protect edges, steps, joints and the junction between wall and floor.
All Progress Profiles products
Connection ring nut for Prosupport Tube supports Progress Profiles
Key features
- Internal diameter, lower part (mm)110
- Upper partThreaded for inserting the adjustment screws
- FunctionFitting for inserting the riser tube
What it is
Connection ring nut for Prosupport Tube supports Progress Profiles. Key specifications: internal diameter, lower part (mm) 110, upper part Threaded for inserting the adjustment screws, function Fitting for inserting the riser tube.
Tile and slab spacers are cross spacers, wedges, levelling systems and pedestals that keep joints even and surfaces aligned during laying.
What it is for
Used for levelling surfaces and structures and for setting out, for laying large-format slabs, where handling and flatness are the challenge and for floor laying, from the screed to the finish.
How to use it
Insert cross spacers and spacers between the tiles in the fresh adhesive to keep the joint width constant, and remove them before grouting. Place levelling clips under the slab edges and tighten them with a wedge or pliers until the slabs are aligned, then snap them off once the adhesive has set. Adjust raised floor pedestals by screwing the head up or down to the required level.
Where it is used
- Residential construction
- Renovation
Technical data
- Internal diameter, lower part (mm): 110
- Upper part: Threaded for inserting the adjustment screws
- Function: Fitting for inserting the riser tube
Who it is for
Designed for flooring and paving contractors, tilers and floor layers.
Standards and safety
Company certified to UNI EN ISO 9001:2015
Related products
- Noise-reducing rubber insert for joists Prorail Rubber Progress Profiles
- Connection ring nut for Prosupport Tube Progress Profiles
- Pulling pliers for Proleveling Wedge system Progress Profiles — from the category Tile Laying and Grouting Tools
- Head with removable fins Progress Profiles — from the category Installation Products and Accessories
- Tile-cutting pliers Kera-cut 3206 Pavan — from the category Tile Cutting, Finishing and Shaping Tools
- Browse the whole category: Spacers for Floor Slabs and Tiles
Before you order
In your request, please state the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 3
| Internal diameter, lower part (mm) | 110 |
|---|---|
| Upper part | Threaded for inserting the adjustment screws |
| Function | Fitting for inserting the riser tube |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
RubiSpirit level Alucast RubiCode livelle-rubilevel-alucast
Check whether surfaces, lines and components are level, plumb or sloping.
PavanTile lifter for laying large-format slabs PavanCode S0313560
Lift and lay glass and stone slabs, large tiles and panels using vacuum suction.
For safety
VigorTiler's knee pads, PP shell, VigorCode 54281-20
Protect knees from pain and crushing when working kneeling on the ground.