Progress ProfilesPerimeter profile for raised floors Prosupport Profile T ...Code prosupport-profile-t
Finish and protect edges, steps, joints and the junction between wall and floor.
All Progress Profiles products
Base kit (base + screw), PROSUPPORT, Progress Profiles
Key features
- MaterialPolypropylene
- ProSupport tube system height range (mm)29 - 1000
- Complete system components1 base, 2 screws, 1 ring nut, 2 heads, set of tubes to reach the required height
What it is
Base kit (base + screw), PROSUPPORT, Progress Profiles. Key specifications: material Polypropylene, proSupport tube system height range (mm) 29 - 1000, complete system components 1 base, 2 screws, 1 ring nut, 2 heads, set of tubes to reach the required height.
Tile and slab spacers are cross spacers, wedges, levelling systems and pedestals that keep joints even and surfaces aligned during laying.
What it is for
Used for levelling surfaces and structures and for setting out, for laying large-format slabs, where handling and flatness are the challenge and for floor laying, from the screed to the finish.
How to use it
Insert cross spacers and spacers between the tiles in the fresh adhesive to keep the joint width constant, and remove them before grouting. Place levelling clips under the slab edges and tighten them with a wedge or pliers until the slabs are aligned, then snap them off once the adhesive has set. Adjust raised floor pedestals by screwing the head up or down to the required level.
Where it is used
- Residential construction
- Renovation
Technical data
- Material: Polypropylene
- ProSupport tube system height range (mm): 29 - 1000
- Complete system components: 1 base, 2 screws, 1 ring nut, 2 heads, set of tubes to reach the required height
Who it is for
Designed for flooring and paving contractors, tilers and floor layers.
Standards and safety
Company certified to UNI EN ISO 9001:2015
Related products
- Base kit with screw for Prosupport supports Progress Profiles
- Noise-reducing rubber insert for joists Prorail Rubber Progress Profiles
- Notched trowel Progress Profiles — from the category Tile Laying and Grouting Tools
- Polyisocyanurate panel for balconies and terraces Pro-GoBoard Panel System Progress Profiles — from the category Installation Products and Accessories
- Premium cutting pliers for 3-15 mm thicknesses Raimondi — from the category Tile Cutting, Finishing and Shaping Tools
- Browse the whole category: Spacers for Floor Slabs and Tiles
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 3
| Material | Polypropylene |
|---|---|
| ProSupport tube system height range (mm) | 29 - 1000 |
| Complete system components | 1 base, 2 screws, 1 ring nut, 2 heads, set of tubes to reach the required height |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
MetricaProfessional spirit level prismatic base Metrica
Check whether surfaces, lines and components are level, plumb or sloping.
PavanTile lifter for laying large-format slabs PavanCode S0313560
Lift and lay glass and stone slabs, large tiles and panels using vacuum suction.
For safety
VigorTiler's knee pads, PP shell, VigorCode 54281-20
Protect knees from pain and crushing when working kneeling on the ground.