Connect the harness to the anchor and absorb the jolt in the event of a fall from height.

Anchor GAKO 12, Irudek
Key features
- StandardEN 795 A | EN 959-2
- Capacity1 user
- Resistance (kN)23
- Dimensions (mm)70 × 90 × 110
- Service lifeUnlimited
- CertificationsEN 795 | EN 959-2
What it is
Anchor GAKO 12 (code 101007800177) is an Irudek anchor device for fall protection. It is intended for professional use for working at height safely, in accordance with the manufacturer's instructions.
A fall protection anchor is the fixed point, permanent or mobile, to which the worker's fall arrest or rope access system is connected.
What it is for
Used as an anchor point in fall protection systems, as personal protective equipment in hazardous work and for work at height, where access and restraint must be ensured for the whole job.
How to use it
Choose the type according to the substrate (concrete, rock, steel, beam, vehicle) and install it following the manufacturer's instructions, using the specified fixings. Check its condition before use and connect with a connector, preferably above the worker's head. Take into account the fall clearance below the work position; an anchor that has arrested a fall must be taken out of service.
Where it is used
- Industrial construction
- Residential construction
- Workplace safety and PPE
Technical data
- Standard: EN 795 A | EN 959-2
- Capacity: 1 user
- Resistance (kN): 23
- Dimensions (mm): 70 × 90 × 110
- Service life: Unlimited
- Certifications: EN 795 | EN 959-2
Who it is for
Designed for formwork carpenters, building maintenance operatives, construction workers and health and safety officers.
Standards and compliance
Device compliant with EN 795 A | EN 959-2. The manufacturer's data sheet and user manual are available.
Related products
- Anchor Hitch Base, Irudek
- Anchor GAKO 10, Irudek
- Harness Light 5, Irudek — from the category Fall Arrest Harnesses
- Connector SILVERLIGHT 988 Irudek — from the category Safety Karabiners
- Fall-arrest lanyard with energy absorber ASTUN Y 140HSA (373) Irudek — from the category Lanyards and Energy Absorbers
- Browse the whole category: Anchors
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 6
| Standard | EN 795 A | EN 959-2 |
|---|---|
| Capacity | 1 user |
| Resistance (kN) | 23 |
| Dimensions (mm) | 70 × 90 × 110 |
| Service life | Unlimited |
| Certifications | EN 795 | EN 959-2 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Connect harnesses, lanyards and anchors to protect against falls when working at height.
Connect harness, lanyards and anchors in systems that protect against falls from height.
For safety
Protect against falls from height by supporting the body during work at height.
Follow the operator's movements and lock instantly to protect against falls from height.





