Plastering machine, M5 Evolution, Maltech

What it is

Plastering machine, M5 Evolution, Maltech. Key specifications: capacity approx. 5-30 l/min, max range distance (m) ca. 30, pump motor 5,5 kW 400 V.

A plastering machine is a machine that mixes and pumps mortars and plasters to the spray gun; this category also includes mortar pumps and spare parts such as stators and rotors.

What it is for

Used for plastering walls and ceilings, by hand or by machine and for mixing mortars and adhesives.

How to use it

Connect the machine to water, power or compressed air, set the water flow according to the product and load the pre-mixed material into the hopper. Spray the mortar onto the wall in even bands, keeping the gun at a constant distance, then screed and finish. At the end of the job, immediately wash out the hopper, hoses and pump, and replace the stator and rotor when the pressure drops.

Where it is used

• Residential construction
• Renovation

Technical data

• Capacity: approx. 5-30 l/min
• Max range distance (m): ca. 30
• Pump motor: 5,5 kW 400 V
• Cell wheel motor: 0,55 kW 400 V
• Compressor flow rate (l/min): 220
• Min water pressure (bar): 3
• Operating voltage: 400 V 50 Hz 17 A 3~ / 230 V 60 Hz 30 A 3~
• Width (mm): 720
• Length (mm): 1050
• Height (mm): 1530
• Tank height (mm): 940
• Body material capacity (L): ca. 110
• Overall weight (kg): 257
• Pump: D6-3

Who it is for

Designed for bricklayers and plasterers.

Standards and safety

Not explicitly indicated on the website or in the PDF data sheet (no CE marking or harmonised standard is cited in the texts available). As the machine is intended for the EU market, compliance with the Machinery Directive is presumed, but this is not publicly declared in the pages consulted.

Related products

• Plastering machine, M5 Evolution, 230 V, Maltech
• Plastering machine, Miniplaster, Maltech
• Expansive mortar for non-explosive demolition Betonfix DM Kimia — from the category Cement and Lime Mortars
• Fixed Rail Accessories CSC Edilizia — from the category Screeding Straightedges
• Two-stage belt-driven high-pressure compressor BK119-90-5,5-A.P. Fini Compressori — from the category Professional Compressors
• Browse the whole category: Plastering Machines with Built-In Mixer

Before you order

In your request, please state the length, the supply voltage, the rated load or flow rate and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.