KimiaDehumidifying hydraulic lime mortar for macroporous plast...Code Limepor MONO
Repair, render and fill masonry and concrete once mixed.
Accessories collection:Cement and Lime MortarsTrowels, Spatulas and FloatsWall Sanders, Polishers and Power Floats
All Imer Group products
Plastering machine with continuous-cycle mixer Koine 4 Evo Hi-Flow Imer Group
Key features
- TypeHigh-flow continuous-cycle mixing pump
- Power supply400 V / 50 Hz
- Max installed power (kW)6,8
- Mixer motor power (kW)5,5
- Material flow rate (l/min)80
- Max pumping distance (m)60
What it is
Plastering machine with continuous-cycle mixer Koine 4 Evo Hi-Flow Imer Group. Key specifications: type High-flow continuous-cycle mixing pump, power supply 400 V / 50 Hz, max installed power (kW) 6,8.
A plastering machine is a machine that mixes and pumps mortars and plasters to the spray gun; this category also includes mortar pumps and spare parts such as stators and rotors.
What it is for
Used for plastering walls and ceilings, by hand or by machine and for mixing mortars and adhesives.
How to use it
Connect the machine to water, power or compressed air, set the water flow according to the product and load the pre-mixed material into the hopper. Spray the mortar onto the wall in even bands, keeping the gun at a constant distance, then screed and finish. At the end of the job, immediately wash out the hopper, hoses and pump, and replace the stator and rotor when the pressure drops.
Where it is used
- Residential construction
- Renovation
Technical data
- Type: High-flow continuous-cycle mixing pump
- Power supply: 400 V / 50 Hz
- Max installed power (kW): 6,8
- Mixer motor power (kW): 5,5
- Material flow rate (l/min): 80
- Max pumping distance (m): 60
- Max pumping height (m): 30
- Hopper capacity (L): 140
- Weight (kg): 250
- Dimensions (mm): 722 x 1187 x 1455 (W x L x H)
Who it is for
Designed for bricklayers and plasterers.
Related products
- Plastering machine with continuous-cycle mixer Koine 4 Evo Imer Group
- Deflector for plastering machine Imer Group
- Pourable epoxy mortar for wood EC-WOOD Fischer — from the category Cement and Lime Mortars
- SVL paver Breaker — from the category Screeding Straightedges
- Professional engine-driven compressor BK119-100-9S Honda A.P. E.Start Fini Compressori — from the category Professional Compressors
- Browse the whole category: Plastering Machines with Built-In Mixer
Before you order
In your request, please state the power rating, the rated load or flow rate and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 10
| Type | High-flow continuous-cycle mixing pump |
|---|---|
| Power supply | 400 V / 50 Hz |
| Max installed power (kW) | 6,8 |
| Mixer motor power (kW) | 5,5 |
| Material flow rate (l/min) | 80 |
| Max pumping distance (m) | 60 |
| Max pumping height (m) | 30 |
| Hopper capacity (L) | 140 |
| Weight (kg) | 250 |
| Dimensions (mm) | 722 x 1187 x 1455 (W x L x H) |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
PavanTriangular blue rubber float for traditional plaster, 819...
Spread, smooth and finish mortars, renders, adhesives and skim coats by hand.
PavanInternal angle screed, 50x50 profile, 700 mm length, 3407...
Level and compact fresh concrete and mortar for screeds and flat floors.
Imer GroupMixing machine Spin 30 Plus Imer GroupCode Spin 30 Plus
Mix mortars, renders, screeds, adhesives and pre-mixed products evenly.
For safety
NeriPolycarbonate safety goggles 6X1-CLEAR Plus Neri 161120Code 161120
Protect eyes and face from fragments, dust, splashes and impacts.