Spread, smooth and finish mortars, renders, adhesives and skim coats by hand.

Dehumidifying hydraulic lime mortar for macroporous plasters Limepor MONO Kimia
Key features
- ModelLimepor MONO
- LineLimepor
- RegulationsEN 998-1
- Made in Italy100% Italian production
- Eco pozzolanaRecyclable natural materials, fired at low temperatures (CO2 reduction)
- PH in aqueous dispersion12
What it is
Kimia Limepor MONO ready-to-use dehumidifying renovation mortar, based on natural hydraulic lime NHL 3.5 and eco-pozzolan. A single product provides both the scratch coat and the macroporous plaster, with salt-blocking and dehumidifying action at the same time. It is CE marked as renovation mortar R CS II to UNI EN 998-1; it is a grey powder, with a pH of 12 in aqueous dispersion. It is not a bulk lime to be mixed with sand.
Lime is a powder binder for bedding mortars, renders and scratch coats, suitable for breathable masonry and the restoration of historic buildings.
What it is for
Used for dehumidifying rooms and structures and for plastering walls and ceilings, by hand or by machine.
How to use it
Remove loose material and dampen the substrate before application. Mix with clean water, and with sand if the product is not pre-blended, in the proportions given in the technical data sheet until a uniform consistency is obtained. Apply by hand or by machine and protect the mortar from sun, wind and frost for the first few days to prevent it drying out too quickly.
Where it is used
- Residential construction
- Conservation and restoration
- Renovation
Technical data
- Model: Limepor MONO
- Line: Limepor
- Regulations: EN 998-1
- Made in Italy: 100% Italian production
- Eco pozzolana: Recyclable natural materials, fired at low temperatures (CO2 reduction)
- PH in aqueous dispersion: 12
- Colour: Grey
- Appearance: Powder product
Who it is for
Designed for bricklayers, restorers and plasterers.
Related products
- Hydraulic lime mortar for plasters and masonry Limepor PMP Kimia
- Dehumidifying hydraulic lime scratch coat mortar Limepor RZ Kimia
- Dried river sand and speciality sands, Bacchi — from the category Inert Materials, Sands and Aggregates
- Mixing machine Mix 360 R Plus Imer Group — from the category Professional Mixers and Planetary Mixers
- Small Swiss-pattern square-point trowel, wooden handle Pavan — from the category Trowels, Spatulas and Floats
- Browse the whole category: Pozzolanic Hydraulic Limes
Before you order
In your request, please state the colour and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 8
| Model | Limepor MONO |
|---|---|
| Line | Limepor |
| Regulations | EN 998-1 |
| Made in Italy | 100% Italian production |
| Eco pozzolana | Recyclable natural materials, fired at low temperatures (CO2 reduction) |
| PH in aqueous dispersion | 12 |
| Colour | Grey |
| Appearance | Powder product |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Mix mortars, adhesives, paints and resins directly in the bucket with the paddle.
Hold and carry mortars, adhesives and water for mixing and dosing on site.
Form the base material of mortars, concretes and subfloors when mixed with binders and water.




