Professional cleaning and sanitisation 2025
Introduction
In professional settings, technical cleaning and environmental sanitisation are no longer a secondary matter but an integral part of service quality, workplace safety and compliance with hygiene and health regulations.
In 2025, the sector offers advanced products and technology for every need, from daily cleaning to special disinfection in critical or high-footfall environments.
1. General-Purpose Professional Cleaners
Designed for everyday use on hard surfaces, floors, wall coverings and equipment, they combine effectiveness, safety and environmental compatibility.
Main characteristics:
- Concentrated or ready-to-use formulations
- Compatible with floor scrubber-dryers and single-disc machines
- Neutral, alkaline or acid pH depending on the substrate
- Low foaming, quick rinsing
- Certifications for professional or industrial use
Examples:
- All-purpose cleaners for workshops and technical areas
- Fast-evaporating industrial degreasers
- Neutral cleaners for sensitive or stone surfaces
- Descalers for cement, limescale and rust
2. Special Chemicals for Technical Cleaning
For highly specific applications, such as industrial plant, equipment, delicate surfaces or persistent contaminants.
Specialist products:
| Product type | Use | Characteristics |
|---|---|---|
| Solvent-based industrial degreasers | Grease, oils, technical residues | High evaporation, compatible with metals |
| Acid descalers | Rust, cement, mineral salts | Compatible with stainless steel, ceramics |
| HVAC system cleaners | Coils, ducts, indoor units | Sanitising action, active foam |
| Anti-static or electronics cleaners | Switchboards, control units, sensors | Dry formulations, non-conductive |
| Products for removing adhesives, resins and inks | Signage, screen printing, construction residues | Suitable for glass, metal, plastic |
3. Manual Equipment for Professional Cleaning
Hand cleaning remains irreplaceable for complex surfaces, fine maintenance or areas that machines cannot reach.
Key equipment:
- Professional microfibre and cotton mops
- Technical dustpans, multi-compartment trolleys, buckets with wringers
- Spatulas, scrapers and technical brushes
- Squeegees and telescopic poles for windows and heights
- Dispensers for paper, soaps, cleaning products and sanitisers
The materials used are resistant to aggressive chemicals, washable at high temperatures and designed for intensive use.
4. Industrial Cleaning Machines
Mechanised solutions are fundamental for large surfaces, production environments and complex building site contexts.
Most common professional machines:
| Machine type | Applications | Functions |
|---|---|---|
| Floor scrubber-dryers (walk-behind / ride-on) | Warehouses, industrial sheds, tunnels, hospitals | Washing + vacuuming |
| Industrial vacuum cleaners | Wet/dry, fine dust | Single-phase or three-phase, HEPA filters |
| High-pressure washers | Outdoor areas, vehicles, porous paving | Hot/cold water versions, diesel or electric |
| Road / industrial sweepers | Paved surfaces, outdoor areas | Collection of dust, debris, sand, leaves |
| Single-disc machines and polishers | Treatments on concrete, marble, PVC | Cleaning, wax stripping, crystallisation |
5. UV Systems and Advanced Technology for Sanitisation
Sanitisation needs since 2020 have led to the introduction of contactless technology and non-chemical methods, especially in healthcare, food industry and transport settings.
Technology available in 2025:
- UV-C sanitisation: lamps or mobile devices for air/surface disinfection
- Electrostatic sprayers: fine atomisation of disinfectants for large spaces
- Professional ozone generators: residue-free sanitisation, ideal for enclosed spaces (controlled use)
- Saturated steam at 160–180°C: eliminates germs and greasy residues without chemicals
- Autonomous sanitising robots for offices, technical rooms or public transport
Advantages:
- No direct contact with operators
- Shorter sanitisation times
- Compatibility with HACCP, ISO, GMP protocols
- Technology suited to critical and healthcare environments
Sector Compliance and Standards
Cleaning and sanitisation solutions must comply with health, safety and environmental standards and regulations:
- Biocidal Products Regulation (EU 528/2012) – Disinfectants and sanitisers
- REACH/CLP – Labelling and safety of chemical substances
- UNI EN ISO 14644 / 22000 – Cleaning in controlled or food environments
- D.Lgs. 81/08 – Operator safety and use of PPE
- CAM Edilizia – Environmental requirements for products used in public works
Conclusion
In 2025, professional cleaning confirms itself as a highly technical and constantly evolving sector, with products and equipment that ensure:
- High performance in high-traffic and high-contamination environments
- Safety for operators and end users
- Compliance with current regulations and environmental sustainability
Want to choose the products and equipment best suited to your site or plant?
Log in to our portal for:
- Data sheets, comparisons and pre-purchase support
- Full 2025 range of cleaning products, sanitisers and professional equipment
- Solutions for operational hire, direct purchase and ongoing supplies
👉 Discover our professional cleaning section now or request tailored advice for your operating sector.
Products covered in this article
Professional Specialist Cleaning Chemicals · 293 items in the catalogue
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
More articles on this topic
Need this equipment?
The AMES catalogue lists more than 40,000 professional items, and if you are not sure where to start we will help you choose. Ask for a no-obligation quote or browse the rental fleet.