0 Quotes 0Compare
0 Compare 0 Quotes

Equipment for Tilers

2942 products

This collection brings together the equipment for those who lay and finish tiles on site: from spreading the adhesive to cutting, from checking levels to grouting the joints. It includes items from brands such as Pavan, Rubi, Stanley, Fervi and Progress Profiles.

What the collection includes

  • Trowels, spatulas and floats for spreading and smoothing adhesives and grouts
  • Tile cutting, finishing and shaping tools
  • Profiles and skirting boards for floors
  • Levelling and marking-out tools, including line lasers
  • Diamond discs and diamond cutting discs
  • Spacers for slabs and tiles
  • Drill bits for glass, ceramic and tiles
  • Mixers, buckets and tubs for preparing mixes

How to choose

  • Match the notch size of trowels and floats to the tile format and the adhesive you will use.
  • Choose the diamond disc according to the material to be cut and the machine on which you fit it.
  • For long alignments, consider a line laser instead of a traditional spirit level.
  • Spacers and profiles must be chosen according to the joint width and the type of edge to be finished.

For a complete supply list, or for advice on matching tools and materials, request a quote from AMES technicians.

2942 results · page 1/123
Frequently asked questions: Equipment for Tilers
Which manual tile cutter should I choose for stoneware?

The manual tile cutter should be chosen according to the maximum size of tile to be cut, stated in the title as up to 36 x 36 cm, and the hardness of the material. The tungsten carbide wheel lasts longer on stoneware, which is harder than ceramic. Score the tile with constant pressure and snap it in a single movement, without going over the same point several times.

Which diamond blade should I choose for cutting ceramic or stoneware?

The diamond blade for ceramic is chosen according to the diameter of the grinder, such as the 115 mm model, and the material to be cut. There are universal blades designed for several materials and blades dedicated to ceramic, which cut more cleanly. Check whether the blade is to be used dry or with water, as indicated by the manufacturer, and always use the guard.

Which drill bits should I use for drilling porcelain stoneware?

For porcelain stoneware you need bits with a diamond or carbide tip, designed for very hard materials. Bits for glass and ceramic have different geometries and should be chosen according to the material to be drilled. Drilling at low speed, without hammer action and with water to cool the bit, extends the life of the tool and reduces the risk of cracks.

How do I smooth joints with a silicone smoothing tool?

The silicone smoothing tool is used to smooth the sealant just applied in the joint, giving a regular, clean finish. Work on a dry, clean joint, with a continuous movement and light pressure, so that the sealant stays in the joint. Remove the excess with a damp cloth before the material hardens, because afterwards it can no longer be removed without damaging the surface.

Which rubber mallets should I choose for laying tiles?

The white rubber mallet is used on delicate surfaces, because it leaves no marks on the tile. The black rubber mallet, such as item 372, is sturdier for more demanding laying work. Tap with light, evenly distributed blows to level the tile in the adhesive, without using metal hammers that can chip the edge.

How do I transport large-format stoneware on site?

The folding slab trolley is used to transport large-format stoneware slabs and keep them upright, reducing the risk of breakage. Slabs should be carefully secured to the trolley and moved by two people when they are heavy. Choose a stable trolley, with wheels suited to the site floor, and store it folded when it is not needed.

Which hole saws and cutters should I use to drill holes in tiles?

For holes in tiles, tile hole cutters or hole saws are used, chosen according to the diameter of the hole to be made, which for the tile hole cutter ranges from 23 to 94 mm. Diamond burrs let you work shapes and edges with more control. Work with water to cool the metal and the tile, and take breaks so that the bit does not overheat.