In your quote
In compare
Demolition Hammers (Chipping Hammers)
76 products · Drills, Drivers and Electric Hammers
Demolition hammers and chipping hammers are used to demolish concrete, masonry and paving, break up screeds and cut chases. They are fitted with chisels and points and are chosen according to power and type of power supply.
Types available
- Electric breakers with SDS-Max or hex shank, corded
- Cordless breakers, with no cable
- Pneumatic breakers, which run on compressed air
- Hydraulic breakers, for dedicated systems
- Pneumatic chipping hammers with chisel sets
Brands included are Breaker, DeWalt, Makita, Milwaukee, Abac, SPIT and Fervi.
How to choose
The job to be done determines the class: light models are for chiselling and finishing, heavy ones for extensive demolition. Check the impact energy, the weight and the tool shank. Pneumatic models require a suitable compressor, electric ones a socket suited to their power.
Prices and availability are set on a quotation basis: write or call us and the AMES team will propose the supply best suited to your work.
Did you know you can also hire this category instead of buying it?
Find out more
Active filters:
Products in this collection
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
In your quote
In compare
Frequently asked questions: Demolition Hammers (Chipping Hammers)
What is a demolition hammer used for?
It is used to demolish concrete, masonry and paving, to break screeds and to cut chases. It takes chisels or points and works with percussive blows, with much more force than a drill. It is used by construction companies, installers and renovators for demolition phases and for cutting chases.
SDS-Max, SDS-Plus or hex: which drive do I need?
SDS-Max is for medium and high-power demolition hammers, with sturdier points. SDS-Plus is for lighter hammers and light demolition, as in the Makita SDS-PLUS demolition hammer category. The hex drive is for smaller demolition hammers and chisels with hex shanks. The type of drive determines which chisels are compatible, so check the data sheet.
Corded, battery or pneumatic demolition hammer: how do I choose?
The corded demolition hammer has continuous power and is used for long jobs. The battery model, such as the Milwaukee MX FUEL MXF DH2528H battery demolition hammer, moves without cables, but charge limits the working hours. The pneumatic hammer requires a compressor and hoses, and is used where compressed air is available, such as in plants and large sites.
What weight class of demolition hammer do I need for a screed?
The weight class indicates the impact power. A 5 or 7 kg demolition hammer, such as Milwaukee models in these classes, is usually enough for chases and breaking thin floors. For thick masonry and reinforced concrete, higher classes are needed, such as the Milwaukee 25 kg demolition hammer. Choose according to the thickness of the material to be demolished.
How do I use a demolition hammer safely?
Wear eye protection, anti-vibration gloves, hearing protection and safety shoes. Before starting, use a detector to check that there are no cables or pipes in the wall, especially gas pipes. Hold the handle with two hands, keep a stable stance and do not work on ladders or in unstable positions.
Which regulations govern vibration for users of demolition hammers?
The demolition hammer transmits vibration to the hands and arms, with a risk of damage if exposure is prolonged. D.Lgs. 81/2008 (the Italian workplace safety law), in the title dedicated to physical agents, requires the employer to assess the risk and reduce it through rotas, breaks and suitable equipment. Choose models with an anti-vibration handle and carry out regular maintenance.
What is the difference between a pneumatic chipping hammer and an electric demolition hammer?
The pneumatic chipping hammer runs on compressed air, as on the Abac chipping hammer with 5-point set 175 mm, and is often used for chipping large surfaces. The electric demolition hammer runs on mains or battery and does not need a compressor. Choose according to whether compressed air is available on site.