Pavan

The Pavan tools brought together in this collection are used to lay tiles, apply skim coats, fill joints and finish surfaces. Among the products you will find tile spacers, tile cutters, floats and spatulas for applying materials, as well as sealant guns and a broom for cleaning the site. The type of tool depends on the job in hand, the material and the finish you need to achieve.

The float is chosen according to the job and the finish. In the catalogue you will find floats with a 1.5 mm white plastic blade and with a 2.5 mm steel blade, mounted on PVC, aluminium or wooden bases. The base affects weight and rigidity, while the blade is chosen according to the material to be spread. It is best to start from the job to be done and then compare the data sheets of the individual models.

Tile spacers, cross or wedge type, are chosen according to the joint thickness you want to achieve. Crosses are convenient for regular joints, while wedge spacers let you adjust the level of the tiles during laying. Some models have a seat for a spirit level, useful for checking flatness. Choose the thickness according to the tile format and the type of laying planned.

The tile cutter should be chosen according to the material, the tile format and how often it is used. For straight cuts on standard-size tiles, a manual wheel model is enough, while for large formats or hard materials a sturdier model is better. Spare parts, such as wheels and handles, can be replaced without changing the tool. Before cutting, check that the tile is well supported and stable.

The hawk is a small plate with a handle, usually made of aluminium, which the bricklayer holds in one hand to carry the mortar to be spread with the trowel or spatula. It is used to carry material to the wall in an orderly way and to work on vertical surfaces. In the Pavan catalogue you will find one with a reinforced base, a 2.5 mm blade and a wooden handle. Choose the size according to the amount of mortar to be handled.

Cartridge guns are divided according to the product to be dispensed: silicone and sealants in cartridges, 600 ml sachets, polyurethane foam and chemical anchors. For silicone a gun with a light rod is used, for foam a dedicated gun and for sachets a specific manual model. Check the cartridge format and compatibility with the product shown on the packaging. Clean the gun after use to keep it in good condition for longer.

Clean the tools with water immediately after use, before mortar or cement hardens, and dry them well to avoid rust on the blades. Store them in a dry place, hung up or in a toolbox, without stacking blades and floats on top of each other. Periodically check handles and bases and replace worn spare parts. A well-kept tool works better and lasts longer.

Wear goggles and gloves when cutting tiles, because fragments can fly off and the wheel can cause injury. Work in a ventilated area when using dusty materials or mortars with additives, and protect your skin when handling cement and mortars, as they are irritants. Keep blades and wheels away from your body and cover them again after use. Do not force the tool if the work jams.