SDS Max XLR 4-cutter bit 30 x 380 x 250 mm DT60832-QZ DeWalt

What it is

SDS Max XLR 4-cutter bit 30 x 380 x 250 mm DT60832-QZ DeWalt. Key specifications: type 4-cutter hammer bit, connection SDS Max, diameter (mm) 30.

An SDS-Max bit is a carbide-tipped bit for rotary hammers with an SDS-Max chuck, for large-diameter, deep holes in concrete and masonry.

What it is for

Used for drilling reinforced concrete, in hammer or rotary hammer mode and for drilling solid and hollow masonry, clay brick and blocks.

How to use it

Clean and lightly grease the shank, insert it into the chuck until it locks and select hammer drilling. Drill with the hammer held in line with the hole, letting the machine's weight do the work without pushing, and withdraw the bit frequently to clear the dust. If you hit a reinforcing bar, stop and move the hole; do not cool a hot bit in water.

Where it is used

• Residential construction
• Building services
• Renovation

Technical data

• Type: 4-cutter hammer bit
• Connection: SDS Max
• Diameter (mm): 30
• Length (mm): 380
• Material: Carbide head
• Use: reinforced concrete, masonry, natural and artificial stone
• Pack (pcs): 1

Who it is for

Designed for demolition operatives and bricklayers.

Related products

• SDS Max XLR drill bit with 4 cutting edges 30 x 570 x 450 mm DT60833-QZ DeWalt
• SDS Max XLR 4-cutter bit 28 x 670 x 550 mm DT60831-QZ DeWalt
• SDS-Max hammer XR FlexVolt 54V 9.0Ah brushless DeWalt DCH481X2-QW — from the category Combination Hammers
• Rotary hammer SDS-Plus 3 modes 28mm 3.0J 900W dual chuck DeWalt — from the category Rotary Hammers
• Mesh sleeve for chemical anchor 85x16mm DeWalt DFC4710050 — from the category Chemical Anchors
• Browse the whole category: SDS Max Drill Bits

Before you order

In your request, please state the length, the diameter, the connection type and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.