Anchor with Expanding Band FAZ II Plus HCR, Fischer

What it is

The Fischer FAZ II Plus HCR anchor is a high-performance mechanical anchor for fixings in concrete under particularly harsh conditions, with seismic certification in category C1. It has a hole diameter d0 of 8 mm, requires a minimum hole depth of 65 mm and is tightened with a 13 mm spanner. Performance is documented by ETA 19/0520 approval and it is suitable for concrete of class 20/25. It is supplied in a box of 10 pcs.

Heavy-duty fixings are steel or reinforced nylon anchors that carry high loads in concrete and solid masonry.

What it is for

Used for anchoring shelves, brackets and structures to walls, for mechanical fixing of structures and components to walls, ceilings and floors and for structural fixings, where the fixing is load-bearing and must be calculated.

How to use it

Drill with a bit of the specified diameter to the required depth, then clean the hole with a brush and blow-out pump. Insert the anchor through the part to be fixed, hammering it in if necessary, and tighten the nut with a torque wrench to the torque specified by the manufacturer. Observe the minimum edge distances and spacings stated in the technical data sheet.

Where it is used

• Industrial construction
• Residential construction
• Building services

Technical data

• Seismic certification: C1
• Hole diameter d0 (mm): 8
• Min hole depth for installation (mm): 65
• Fixable thickness with HEF STAND HE (mm): 10 / 20
• Tightening wrench (mm): 13
• Pack: Box
• Pieces per pack: 10
• ETA approval: 19/0520
• Concrete class: 20/25

Who it is for

Designed for electricians, metal fabricators and plumbers.

Related products

• Anchor with Expanding Band FAZ II Plus K, Fischer
• Anchor with Expanding Band FAZ II Plus HBS, Fischer
• Masonry drill bit Pointer U Fischer — from the category Drill Bits for Granite, Masonry and Concrete
• Rotary hammer Makita HR2300 — from the category Rotary Hammers
• Combination wrench 19 mm Stanley STMT95912-0 — from the category Combination Spanners
• Browse the whole category: Heavy-Duty Anchors

Before you order

In your request, please state the diameter and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.