FischerCylindrical-shank drill bits FischerCode PUNTE-ATTACCO-C
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.
Accessories collection:Drill Bits for Granite, Masonry and ConcreteHammer Drills, Drill Drivers and Rotary HammersScrewdriving Inserts and Bits
All Fischer products
Control cylinder FUP Fischer
Key features
- Available sizesFUP 10, FUP 12, FUP 14
- Usechecking the outer thread diameter of UltraCut FBS II screws
- Pack (pcs)1
What it is
Control cylinder FUP Fischer. Key specifications: use checking the outer thread diameter of UltraCut FBS II screws, pack (pcs) 1.
A concrete screw is a screw anchor that is driven directly into the hole in concrete or masonry, cutting its own thread, without a plug.
What it is for
Used for anchoring shelves, brackets and structures to walls, for mechanical fixing of structures and components to walls, ceilings and floors and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Drill with a bit of the diameter specified for the screw to the required depth and clean the hole thoroughly. Drive the screw through the part being fixed with a spanner or impact driver until it is seated, without overtightening. Observe the edge distances and hole spacings stated in the technical data sheet.
Where it is used
- Industrial construction
- Residential construction
- Building services
Technical data
- Use: checking the outer thread diameter of UltraCut FBS II screws
- Pack (pcs): 1
Who it is for
Designed for electricians, metal fabricators and plumbers.
Standards and compliance
Expansion anchors for concrete comply with Eurocode 2 Part 4 (EN 1992-4) and are ETA-certified under the EAD (formerly ETAG 001). CE marking is mandatory under EU Regulation 305/2011 (CPR), with materials compliant with EN ISO 3506 (A2 / A4).
Related products
- Check cylinder FUP for UltraCut FBS II screws Fischer
- Concrete anchor UltraCut FBS II 6 M8/19-M10/21-M8/M10 Fischer
- Masonry drill bit PMN Fischer — from the category Drill Bits for Granite, Masonry and Concrete
- Impact driver 1/4'' brushless V20 - 2.0 Ah battery Stanley — from the category Impact Drivers (Hex Drive)
- Set of plastic-coated hex impact sockets Fervi 0341 — from the category Impact Sockets
- Browse the whole category: Concrete Screws (Screw Anchors)
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 3
| Available sizes | FUP 10, FUP 12, FUP 14 |
|---|---|
| Use | checking the outer thread diameter of UltraCut FBS II screws |
| Pack (pcs) | 1 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
DeWaltMagnetic hex socket 50mm DeWalt DT7403-QZCode DT7403-QZ
Transmit the torque of the impact driver to nuts and bolts without breaking.
StanleyCordless rotary hammer brushless SDS Plus 18V Fatmax V20 ...
Drill concrete, masonry and stone by combining rotation and hammer action.
MilwaukeeImpact wrench M18 FUEL ONE-KEY with torque control ½″ squ...
Drive and remove stubborn screws and bolts with rotary impacts, using bits or sockets.