FischerMasonry drill bit PMN FischerCode 4048962301861
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.
Accessories collection:Drill Bits for Granite, Masonry and ConcreteRotary Hammers (or Hammer Drills)Chemical Anchors
All Fischer products
Heavy-duty fixing anchor FNA II H (hook head) Fischer
Also known as: mechanical anchor, expansion anchor
Key features
- Main featuresGalvanised steel
- Technical data (single variant, 1 of 1)Hole diameter 6 mm; minimum through hole depth 35 mm; boxed pack; quantity 50 pcs; EAN 4006209441268
- ApplicationsWire rope or track suspension systems
- Support materialsCracked C12/25-C50/60 concrete; also solid calcium silicate brick, dense natural stone, precast hollow-core slabs
- CertificationsGS 6.1/21-076-1
What it is
Heavy-duty fixing anchor FNA II H (hook head) Fischer. Key specifications: main features Galvanised steel, applications Wire rope or track suspension systems, certifications GS 6.1/21-076-1.
Heavy-duty fixings are steel or reinforced nylon anchors that carry high loads in concrete and solid masonry.
What it is for
Used for anchoring shelves, brackets and structures to walls, for mechanical fixing of structures and components to walls, ceilings and floors and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Drill with a bit of the specified diameter to the required depth, then clean the hole with a brush and blow-out pump. Insert the anchor through the part to be fixed, hammering it in if necessary, and tighten the nut with a torque wrench to the torque specified by the manufacturer. Observe the minimum edge distances and spacings stated in the technical data sheet.
Where it is used
- Industrial construction
- Residential construction
- Building services
Technical data
- Main features: Galvanised steel
- Applications: Wire rope or track suspension systems
- Certifications: GS 6.1/21-076-1
Who it is for
Designed for electricians, metal fabricators and plumbers.
Related products
- Heavy-duty fixing anchor FNA II M (threaded stud and flanged nut) Fischer
- Heavy-duty fixing anchor FNA II C (nail head, high corrosion-resistance steel C 1.4529) Fischer
- Masonry drill bit PMN Fischer — from the category Drill Bits for Granite, Masonry and Concrete
- Cordless rotary hammer CXT® Makita HR140DZJ — from the category Rotary Hammers
- Set of combination spanners in soft foam tray Fervi TM01/002 — from the category Combination Spanners
- Browse the whole category: Heavy-Duty Anchors
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 5
| Main features | Galvanised steel |
|---|---|
| Technical data (single variant, 1 of 1) | Hole diameter 6 mm; minimum through hole depth 35 mm; boxed pack; quantity 50 pcs; EAN 4006209441268 |
| Applications | Wire rope or track suspension systems |
| Support materials | Cracked C12/25-C50/60 concrete; also solid calcium silicate brick, dense natural stone, precast hollow-core slabs |
| Certifications | GS 6.1/21-076-1 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
FischerSeismic cables FWI-S FischerCode 4048962496642
Make tie rods, bracing, fencing and tensioned lines using wire ropes and fittings.
A.M.E.S. srlHeavy-duty nickel-plated brass karabiners
Connect chains, ropes and straps to the load or to the attachment point.
MakitaRotary hammer Makita M8701Code M8701
Drill concrete, masonry and stone by combining rotation and hammer action.