FischerMasonry drill bit D-SDX FischerCode 4048962320176
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.
Accessories collection:Drill Bits for Granite, Masonry and ConcreteRotary Hammers (or Hammer Drills)Chemical Anchors
All Fischer products
Heavy-duty fixing anchor TA M-G (with pressed hook) Fischer
Also known as: mechanical anchor, expansion anchor
Key features
- Typeexpanding-body anchor, pressed hook
- Available sizesTA M6, M8, M10, M12 G
- Hole diameter (mm)10, 12, 15, 18
- Tightening wrench (mm)10, 13, 17, 19
- Pack (pcs)50 (M6, M8), 25 (M10), 15 (M12); also available in packs of 6 and blister packs of 1
- Support materialnon-cracked concrete C20/25 to C50/60 (approved), also C12/15 and dense natural stone
What it is
Heavy-duty fixing anchor TA M-G (with pressed hook) Fischer. Key specifications: type expanding-body anchor, pressed hook, hole diameter (mm) 10, 12, 15, 18, tightening wrench (mm) 10, 13, 17, 19.
Heavy-duty fixings are steel or reinforced nylon anchors that carry high loads in concrete and solid masonry.
What it is for
Used for anchoring shelves, brackets and structures to walls, for mechanical fixing of structures and components to walls, ceilings and floors and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Drill with a bit of the specified diameter to the required depth, then clean the hole with a brush and blow-out pump. Insert the anchor through the part to be fixed, hammering it in if necessary, and tighten the nut with a torque wrench to the torque specified by the manufacturer. Observe the minimum edge distances and spacings stated in the technical data sheet.
Where it is used
- Industrial construction
- Residential construction
- Building services
Technical data
- Type: expanding-body anchor, pressed hook
- Hole diameter (mm): 10, 12, 15, 18
- Tightening wrench (mm): 10, 13, 17, 19
- Pack (pcs): 50 (M6, M8), 25 (M10), 15 (M12); also available in packs of 6 and blister packs of 1
- Assembly: non-through
Who it is for
Designed for electricians, metal fabricators and plumbers.
Related products
- Heavy-duty fixing anchor TA M-H (blind nut) Fischer
- Heavy-duty fixing anchor TA M-B (with threaded rod, class 5.8) Fischer
- Masonry drill bit SDS Plus II 8/100/400 Fischer — from the category Drill Bits for Granite, Masonry and Concrete
- Cordless rotary hammer SDS+ brushless 18V 4.0Ah (FMCD900M2S-QW) Stanley — from the category Rotary Hammers
- Set of combination spanners in soft foam tray Fervi TM01/002 — from the category Combination Spanners
- Browse the whole category: Heavy-Duty Anchors
Before you order
In your request, please state the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 8
| Type | expanding-body anchor, pressed hook |
|---|---|
| Available sizes | TA M6, M8, M10, M12 G |
| Hole diameter (mm) | 10, 12, 15, 18 |
| Tightening wrench (mm) | 10, 13, 17, 19 |
| Pack (pcs) | 50 (M6, M8), 25 (M10), 15 (M12); also available in packs of 6 and blister packs of 1 |
| Support material | non-cracked concrete C20/25 to C50/60 (approved), also C12/15 and dense natural stone |
| Assembly | non-through |
| Use | metal structures, handrails, steps, cable walkways, machinery, stairs, gates, facades |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
FischerSeismic cables FWI-S FischerCode 4048962496642
Make tie rods, bracing, fencing and tensioned lines using wire ropes and fittings.
A.M.E.S. srlHeavy-duty nickel-plated brass karabiners
Connect chains, ropes and straps to the load or to the attachment point.
MakitaRotary hammer Makita HR1841FJCode HR1841FJ
Drill concrete, masonry and stone by combining rotation and hammer action.