FischerConcrete drill bit SDS Plus II Pointer V FischerCode 4048962211764
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.
Accessories collection:Drill Bits for Granite, Masonry and ConcreteHammer Drills, Drill Drivers and Rotary HammersScrewdriving Inserts and Bits
All Fischer products
Concrete screw UltraCut FBS II 8-10 SK in galvanised steel with flat countersunk head Fischer
Also known as: screw anchor, masonry screw
Key features
- ColourGalvanised
- MaterialSteel
What it is
Concrete screw UltraCut FBS II 8-10 SK in galvanised steel with flat countersunk head Fischer. Key specifications: colour Galvanised, material Steel.
A concrete screw is a screw anchor that is driven directly into the hole in concrete or masonry, cutting its own thread, without a plug.
What it is for
Used for anchoring shelves, brackets and structures to walls.
How to use it
Drill with a bit of the diameter specified for the screw to the required depth and clean the hole thoroughly. Drive the screw through the part being fixed with a spanner or impact driver until it is seated, without overtightening. Observe the edge distances and hole spacings stated in the technical data sheet.
Where it is used
- Industrial construction
- Residential construction
- Building services
Technical data
- Colour: Galvanised
- Material: Steel
Who it is for
Designed for electricians, metal fabricators and plumbers.
Related products
- Concrete screw UltraCut FBS II 8-10 SK R stainless steel Fischer
- Concrete screw UltraCut FBS II 8-10 SK with flat countersunk head (galvanised) Fischer
- Cylindrical-shank drill bits Fischer — from the category Drill Bits for Granite, Masonry and Concrete
- Cordless impact driver 18V lithium 2.0Ah (FMC645D2) Stanley — from the category Impact Drivers (Hex Drive)
- Magnetic hex-shank nut driver Shockwave 5.5 x 65 mm Milwaukee 4932492434 — from the category Impact Sockets
- Browse the whole category: Concrete Screws (Screw Anchors)
Before you order
In your request, please state the colour and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 2
| Colour | Galvanised |
|---|---|
| Material | Steel |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
DeWaltImpact Ready nut socket 10mm DeWalt DT7466-QZCode DT7466-QZ
Transmit the torque of the impact driver to nuts and bolts without breaking.
StanleySDS+ rotary hammer 1250W 3.5J (FME1250K-QS) Stanley
Drill concrete, masonry and stone by combining rotation and hammer action.
MilwaukeeVery-high-torque impact wrench M18 FUEL ONE-KEY 1″ square...
Drive and remove stubborn screws and bolts with rotary impacts, using bits or sockets.