Skip to content
0 Quotes 0Compare
All Pedrollo products

Submersible well pump 4-BLOCK Pedrollo

Also known as: submersible pump, borehole pump, deep well pump

Code 4-BLOCK

Key features

  • CapacityUp to 200 l/min (12 m³/h)
  • Motor2-pole
  • Outer casingStainless steel AISI 304
  • ShaftAISI 304 stainless steel
  • SupportTechnopolymer and brass
  • HeadUp to 140 m
See all 14 specifications

What it is

Submersible well pump 4-BLOCK Pedrollo. Key specifications: capacity Up to 200 l/min (12 m³/h), motor 2-pole, outer casing Stainless steel AISI 304.

A 4-inch multistage pump is a submersible electric borehole pump that lifts clean water from great depths for domestic, irrigation or municipal use.

What it is for

Used in irrigation systems, from the water supply point to the emitter and for pumping water out of excavations, tanks and sumps.

How to use it

Check the borehole diameter, the water level and that there is no sand, as the pump is designed for clean water. Lower the pump on a safety rope together with the delivery pipe, joining the cable with a watertight splice, and position it below the minimum water level but clear of the bottom. The connection to the control panel, with dry-running protection, must be made by an electrician.

Where it is used

  • Agriculture
  • Building services
  • Water engineering works

Technical data

  • Capacity: Up to 200 l/min (12 m³/h)
  • Motor: 2-pole
  • Outer casing: Stainless steel AISI 304
  • Shaft: AISI 304 stainless steel
  • Support: Technopolymer and brass
  • Head: Up to 140 m
  • Liquid temperature: Up to +35 °C
  • Maximum sand content: 200 g/m³
  • Maximum operating depth (m): 100
  • IP protection rating: IP68
  • Delivery casing: Stainless steel AISI 304
  • Impellers: Derlin®
  • Diffusers: Noryl™

Who it is for

Designed for plumbers, agricultural workers and heating and plumbing engineers.

Related products

Before you order

In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.

Quantity
Specifications 14
Item code4-BLOCK
CapacityUp to 200 l/min (12 m³/h)
Motor2-pole
Outer casingStainless steel AISI 304
ShaftAISI 304 stainless steel
SupportTechnopolymer and brass
HeadUp to 140 m
Liquid temperatureUp to +35 °C
Maximum sand content200 g/m³
Maximum operating depth (m)100
IP protection ratingIP68
Delivery casingStainless steel AISI 304
ImpellersDerlin®
DiffusersNoryl™

The perfect setup for this job

Everything you need in one place, from functionality to safety.

For the job

A.M.E.S. srlCable clamps Block FIX

Make tie rods, bracing, fencing and tensioned lines using wire ropes and fittings.

A.M.E.S. srlBrass T-connector art. 296

Join pipes and components of water systems with threaded joints and reducers.