SPITID-ALL chemical anchoring system for hollow masonry M6-M1...
Bond threaded rods and sleeves into the hole for heavy-duty fixings in concrete and masonry.
Accessories collection:Professional Acrylic, PU, MS Polymer and Bituminous SealantsChemical AnchorsPolyurethane (PU) Foams for Filling and Sealing
All SPIT products
Cleaning brush spacer SPIT
Key features
- TypeMetal extension for cleaning brushes
- MaterialMetal
- Length (mm)325
- UseManual cleaning of deep holes in solid materials
- Pack (pcs)1
What it is
Cleaning brush spacer SPIT. Key specifications: type Metal extension for cleaning brushes, material Metal, length (mm) 325.
The hole cleaning brush is a cylindrical brush with nylon or steel bristles, manual or with a drill fitting, used to clean drilling dust out of the hole before injecting the chemical anchor.
What it is for
Used for chemical anchoring, where the load or edge distance rules out a mechanical anchor and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Choose the diameter suited to the hole and insert it all the way to the bottom with a rotating, back-and-forth movement. Alternate brushing and blowing as indicated by the anchor manufacturer, because a dirty or dusty hole reduces the holding strength. For deep holes, fit an extension. Brushes with bent or worn bristles should be replaced.
Where it is used
- Industrial construction
- Residential construction
- Renovation
Technical data
- Type: Metal extension for cleaning brushes
- Material: Metal
- Length (mm): 325
- Use: Manual cleaning of deep holes in solid materials
- Pack (pcs): 1
Who it is for
Designed for formwork carpenters, metal fabricators, building maintenance operatives and bricklayers.
Related products
- Cleaning brush spacer SPIT 151266
- Installation accessories for two-component chemical anchors SPIT 88211
- Acrylic joint filler Cemento Espresso DEC 310 ml Fischer — from the category Professional Acrylic, PU, MS Polymer and Bituminous Sealants
- Chemical Anchor Easymix, SPIT — from the category Chemical Anchors
- Polyurethane foam BCF 750 TA B2 AUT Bossong — from the category Polyurethane (PU) Foams for Filling and Sealing
- Browse the whole category: Adhesive and Sealant Application Systems
Before you order
In your request, please state the length and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 5
| Type | Metal extension for cleaning brushes |
|---|---|
| Material | Metal |
| Length (mm) | 325 |
| Use | Manual cleaning of deep holes in solid materials |
| Pack (pcs) | 1 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
SPITThreaded rod in A4 stainless steel with setting tool for ...
Make tie rods, hangers and chemical anchor fixings together with nuts, washers and connectors.
SPITSDS-Plus bit XT 3 with 3 cutting edges for concrete SPIT
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.
For safety
NeriGlove Ball Neri 376050Code 376050
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.