Connect harnesses, lanyards and anchors to protect against falls when working at height.

Twin self-retracting fall arrest device TWINBLOK SE-H 2 m Irudek
Key features
- StandardEN 360 | EN 362 | VG11.060
- Length (m)2
- Weight (g)2.740
- Usage capacity (kg)140
- Service life10 years use + 2 years storage
- Impact force (kN)< 6
What it is
The TWINBLOK SE-H retractable fall arrester (code 100307700042) is an Irudek retractable-type fall arrester designed for use in a twin configuration when working at height. With its 2 metres and compact design, it ensures safe progression without obstacles, reducing snagging and falls.
A self-retracting fall arrest device is a reel with a cable or webbing lanyard that follows the worker's movements and locks immediately if the line is jerked by a fall.
What it is for
Used as personal protective equipment in hazardous work, for work at height, where access and restraint must be ensured for the whole job and for fall protection, as part of a fall arrest or work restraint system.
How to use it
Attach it to a certified anchor point, preferably above the work area, and connect it to the fall arrest attachment point of the harness with the connector. Before each use, check that it locks with a sharp pull and inspect the line and the fall indicator. Avoid sharp edges and wide lateral swing; after a fall or at the service due date, send the device for inspection.
Where it is used
- Industrial construction
- Workplace safety and PPE
Technical data
- Standard: EN 360 | EN 362 | VG11.060
- Length (m): 2
- Weight (g): 2.740
- Usage capacity (kg): 140
- Service life: 10 years use + 2 years storage
- Impact force (kN): < 6
- Webbing: Technora 21 mm
- Use: Sharp corner / factor 2
Who it is for
Designed for formwork carpenters, building maintenance operatives, construction workers and health and safety officers.
Standards and compliance
Device compliant with standards EN 360 (retractable-type fall arresters) and EN 362 (connectors), with sharp-edge performance in accordance with specification VG 11.060:2015. The manufacturer's data sheet, declaration of conformity and user manual are available.
Related products
- Retractable Fall Arrester KARBOR 3.5, Irudek
- Twin self-retracting fall arrest device TWINBLOK SE-C 2 m Irudek
- Harness Expert 2 Pro, Irudek — from the category Fall Arrest Harnesses
- Anchor CTA02, Irudek — from the category Horizontal and Vertical Lifeline Anchors
- Connector STEELSAFE 952 Irudek — from the category Safety Karabiners
- Browse the whole category: Retractable Fall Arresters
Before you order
In your request, please state the length and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 8
| Standard | EN 360 | EN 362 | VG11.060 |
|---|---|
| Length (m) | 2 |
| Weight (g) | 2.740 |
| Usage capacity (kg) | 140 |
| Service life | 10 years use + 2 years storage |
| Impact force (kN) | < 6 |
| Webbing | Technora 21 mm |
| Use | Sharp corner / factor 2 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Fix to the roof the points where lifelines and fall protection devices are attached.
Build and complete horizontal and vertical fall arrest lifelines with certified components.
For safety
Protect against falls from height by supporting the body during work at height.
Protect the head from impacts and falling objects on site.





