A.M.E.S. srlFilter regulator 3/8" for compressed air, standard or wit...
Filter, regulate and lubricate compressed air before it reaches the tools.
All A.M.E.S. srl products
Bayonet Fittings
Key features
- Typebayonet fitting, hose tail
- Available sizes (mm)6x12, 6x14, 7x16, 8x12, 8x13, 8x17, 10x14, 10x15
What it is
Bayonet Fittings. Key specifications: type bayonet fitting, hose tail.
Compressed air accessories are tyre inflators and blow guns, couplings, adapters, air tools and condensate drains for connection to the compressor line.
What it is for
Used to supply air tools, from the compressor to the point of use, in compressed air systems, from generation in the compressor room to distribution on the shop floor and for work with air tools.
How to use it
Connect the accessory with a compatible coupling to a depressurised line and set the regulator to the pressure rated for the tool. When inflating, check the gauge frequently and do not exceed the value stated on the tyre or item. Install condensate drains at the low point of the receiver or filters and check their operation periodically.
Where it is used
- Vehicle body repair
- Mechanical engineering industry
- Mechanical workshops
Technical data
- Type: bayonet fitting, hose tail
Who it is for
Designed for vehicle body repairers and mechanics.
Related products
- Bayonet Fitting art. 19
- Bayonet Fitting art. 20
- Compressor Ecosilent 50 L 750 W Vinco 60701 — from the category Piston Compressors
- Pressure reducer art. 31/I — from the category FRL Air Treatment Units
- Refrigerated air dryer COOL 180 180 m³/h, PDP 5 °C, 16 bar Abac — from the category Refrigerated Compressed Air Dryers
- Browse the whole category: Compressed Air Accessories and Tools
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 2
| Type | bayonet fitting, hose tail |
|---|---|
| Available sizes (mm) | 6x12, 6x14, 7x16, 8x12, 8x13, 8x17, 10x14, 10x15 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Fini CompressoriCompressor Siltek TB 50D/3
Power nail guns and blow and paint spray guns on site and in the workshop.
Fini CompressoriCompressor Siltek TS/OL130S
Produce and store compressed air to power air tools, guns and inflation.
A.M.E.S. srlCompressor, 6 l, oil-free
Supply air for inflating, blowing and small air tools wherever needed.
