Spread, smooth and finish mortars, renders, adhesives and skim coats by hand.

Ready-mixed mortar Prontomalt Facciavista Bacchi
Key features
- TypeWater-repellent hydraulic mortar for exposed masonry
- Compositionhydraulic lime, Portland cement, 0-2 mm silica sand
- ClassM5
- Mixing water (L/bag)3,0 - 3,5
- Yieldapprox. 68 bags per 1 m³
- StandardEN 998-2
What it is
Bacchi Prontomalt Facciavista (code M211SAC) is a ready-mixed water-repellent hydraulic mortar for exposed masonry. It is made of hydraulic lime, Portland cement and siliceous sand 0-2 mm, is classified M5 according to EN 998-2 on masonry mortars and is sold in 25 kg bags. The water-repellent treatment reduces the water absorption of the joints, which remain exposed to rain.
Mortars and cements are powder or two-component products which, once mixed, are used to repair, render, fill or bond masonry, concrete and other substrates.
What it is for
Used in masonry work, from laying blocks to filling chases and for laying mortar.
How to use it
Prepare a clean, sound substrate; for cement and lime mortars, pre-wet it to saturation without leaving standing water on the surface. Mix with the amount of water or component stated on the data sheet, using a low-speed mixer, until the mix is uniform. Apply by trowel, float or plastering machine within the pot life, and protect the surface from rapid drying during the first few days.
Where it is used
- Residential construction
Technical data
- Type: Water-repellent hydraulic mortar for exposed masonry
- Composition: hydraulic lime, Portland cement, 0-2 mm silica sand
- Class: M5
- Mixing water (L/bag): 3,0 - 3,5
- Yield: approx. 68 bags per 1 m³
- Standard: EN 998-2
- Pack (kg): 25
Who it is for
Designed for construction labourers, bricklayers and construction workers.
Related products
- Ready-mixed mortar Prontomalt Fibrata Bacchi
- Ready-mixed mortar Prontomalt Bacchi
- Electric mixer MI-9 N Rubi — from the category Mixers
- Trowel, round point, Fervi 0819/20 — from the category Trowels, Spatulas and Floats
- Italian-style rubber bucket with one flat side (10 l) Rubi — from the category Buckets, Tubs and Mortar Buckets
- Browse the whole category: Cement and Lime Mortars
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 8
| Type | Water-repellent hydraulic mortar for exposed masonry |
|---|---|
| Composition | hydraulic lime, Portland cement, 0-2 mm silica sand |
| Class | M5 |
| Mixing water (L/bag) | 3,0 - 3,5 |
| Yield | approx. 68 bags per 1 m³ |
| Standard | EN 998-2 |
| Pack (kg) | 25 |
| Modello | Prontomalt Facciavista |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Mix mortars, adhesives, paints and resins directly in the bucket with the paddle.
Hold and carry mortars, adhesives and water for mixing and dosing on site.
Mix mortars, renders, screeds, adhesives and pre-mixed products evenly.
For safety
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.





