Pumps BP 1 BARREL Kärcher

What it is

Pumps BP 1 BARREL Kärcher. Key specifications: simple ignition level setting Sì, rated input power (W) 400, voltage (V) 230.

A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.

What it is for

Used in irrigation systems, from the water supply point to the emitter and for pumping water out of excavations, tanks and sumps.

How to use it

Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.

Where it is used

• Agriculture
• Water engineering works

Technical data

• Simple ignition level setting: Sì
• Rated input power (W): 400
• Voltage (V): 230
• Weight (kg): 4,6
• Gross weight (kg): 5,7
• Max flow rate (l/h): < 3800
• Pressure (bar): max. 1.1
• Delivery height (m): 11
• Dimensions (mm): 135 x 170 x 520

Who it is for

Designed for plumbers and agricultural workers.

Related products

• Pumps BP 2.000-18 Barrel Kärcher
• Submersible pump BP 2 for tanks Kärcher
• PrimFlex Plus flexible hose 5/8" – 50m Kärcher — from the category Water Hoses and Layflat Hoses
• Galvanised steel socket F/F art. 308 — from the category Galvanised Pipe Fittings
• One-piece underground tanks, smooth cistern, polyethylene, Rototec — from the category Tanks, Cisterns and Drums for Liquid Storage
• Browse the whole category: Clean Water Pumps

Before you order

In your request, please state the supply voltage, the power rating, the rated load or flow rate and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.