Pneumatic nailer for metal connectors PSN 50 NP SPIT 115669

What it is

Pneumatic nailer for metal connectors PSN 50 NP SPIT 115669. Key specifications: nail angle, degrees 34, nail length (mm) 40 - 50, nail material Plastic or paper.

The stapler or nailer is a tool, manual, pneumatic, electric, cordless, gas-powered or powder-actuated, that drives staples or nails to fasten wood, panels, insulation and fabrics; the gas or powder-actuated versions also fasten into steel and concrete.

What it is for

Used for nailing battens, formwork and timber structures and for fixing into timber, from assembly work to carpentry.

How to use it

Load staples or nails of the type and length specified for the tool; gas or powder-actuated models also use the gas cell or the specified charge. Rest the nose perpendicular to the workpiece, press until it is seated and fire; on pneumatic models, set the air pressure first. Never point it at people, disconnect the air or battery and remove the charge before clearing a jam. Wear safety glasses and, with powder-actuated models, ear protection as well.

Where it is used

• Residential construction
• Renovation

Technical data

• Nail angle, degrees: 34
• Nail length (mm): 40 - 50
• Nail material: Plastic or paper
• Type: Multi-stroke pneumatic

Who it is for

Designed for formwork carpenters and joiners.

Related products

• Automatic coil nailer Cw 550 Toolmatic SPIT
• Pneumatic nailer for metal connectors PSN 50 NP SPIT
• Points for seaming machine — from the category Staples
• Nail kit, 16° coil, wire-welded, bright, SPIT — from the category Staples, Collated Nails, Powder Loads and Accessories
• Compressor 6 L Proline160 SPIT -115681 — from the category Small Compressors – 6 to 24 Litres
• Browse the whole category: Staplers and Nailers

Before you order

In your request, please state the length and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.