Carry water for irrigating, washing and supplying machines in the garden and on site.

Electric pumps CN 50 Wortex
Key features
- Domestic use liquid temperature, EN 60335 2 41Up to 35°C
- Maximum liquid temperature, other uses90°C
- Ambient temperatureUp to 40°C
- Gauge suction height (m)up to 7
- ServiceContinuous
- MotorElectric induction 2-pole (2850 rpm)
What it is
Electric pumps CN 50 Wortex. Key specifications: domestic use liquid temperature, EN 60335 2 41 Up to 35°C, maximum liquid temperature, other uses 90°C, ambient temperature Up to 40°C.
A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.
What it is for
Used in irrigation systems, from the water supply point to the emitter and for pumping water out of excavations, tanks and sumps.
How to use it
Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.
Where it is used
- Building services
- Water engineering works
Technical data
- Domestic use liquid temperature, EN 60335 2 41: Up to 35°C
- Maximum liquid temperature, other uses: 90°C
- Ambient temperature: Up to 40°C
- Gauge suction height (m): up to 7
- Service: Continuous
- Motor: Electric induction 2-pole (2850 rpm)
- Insulation: Class F
- Protection: IP55
- Pump body: Cast iron
- Support: Cast iron
- Impeller: Cast iron
- Drive shaft: Stainless steel AISI 304
- Mechanical seal: Ceramic/graphite/NBR
Who it is for
Designed for plumbers.
Related products
- Electric pumps CN 65 Wortex
- Electric pumps CN 40 Wortex
- Set of 1/2'' flexible hoses with hose reel Kärcher — from the category Water Hoses and Layflat Hoses
- 90° FF Angles, art. 90 — from the category Galvanised Pipe Fittings
- Modular underground tanks, Minitank, polyethylene, Rototec — from the category Tanks, Cisterns and Drums for Liquid Storage
- Browse the whole category: Clean Water Pumps
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 13
| Domestic use liquid temperature, EN 60335-2-41 | Up to 35°C |
|---|---|
| Maximum liquid temperature, other uses | 90°C |
| Ambient temperature | Up to 40°C |
| Gauge suction height (m) | up to 7 |
| Service | Continuous |
| Motor | Electric induction 2-pole (2850 rpm) |
| Insulation | Class F |
| Protection | IP55 |
| Pump body | Cast iron |
| Support | Cast iron |
| Impeller | Cast iron |
| Drive shaft | Stainless steel AISI 304 |
| Mechanical seal | Ceramic/graphite/NBR |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Connect and fit out pumps, tanks and cisterns so that the water system works.
Join pipes and components of water systems with threaded joints and reducers.
Distribute power on site and protect people and tools from overloads and earth leakage.




