Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.

Universal Expansion Anchor PTB M8 x 130, DeWalt DFM1110180
Also known as: through bolt, wedge anchor, expansion bolt
Key features
- Pieces per pack20
- Length (mm)130
- ThreadM8
What it is
DeWalt DFM1110180 universal expansion anchors of the PTB series are mechanical fixings with a product length of 130 mm, supplied in packs of 20 pieces. The expansion principle inside the hole ensures a firm, immediate hold, without the curing times typical of chemical anchors.
Heavy-duty fixings are steel or reinforced nylon anchors that carry high loads in concrete and solid masonry.
What it is for
Used for anchoring shelves, brackets and structures to walls, for mechanical fixing of structures and components to walls, ceilings and floors and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Drill with a bit of the specified diameter to the required depth, then clean the hole with a brush and blow-out pump. Insert the anchor through the part to be fixed, hammering it in if necessary, and tighten the nut with a torque wrench to the torque specified by the manufacturer. Observe the minimum edge distances and spacings stated in the technical data sheet.
Where it is used
- Industrial construction
- Residential construction
- Building services
Technical data
- Pieces per pack: 20
- Length (mm): 130
- Thread: M8
Who it is for
Designed for electricians, metal fabricators and plumbers.
Related products
- Universal Expansion Anchor PTB M8 x 155, DeWalt DFM1110200
- Universal Expansion Anchor PTB M8 x 105, DeWalt DFM1110160
- SDS Max XLR bit 22x340x200mm DeWalt DT60819-QZ — from the category Drill Bits for Granite, Masonry and Concrete
- Cordless rotary hammer SDS-Plus 26 mm XR 18V brushless 1x4Ah DeWalt DCH133M1-QW — from the category Rotary Hammers
- 18-piece combination spanner set DeWalt DWMT19237-1 — from the category Combination Spanners
- Browse the whole category: Heavy-Duty Anchors
Before you order
In your request, please state the length and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 3
| Pieces per pack | 20 |
|---|---|
| Length (mm) | 130 |
| Thread | M8 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Drill concrete, masonry and stone by combining rotation and hammer action.
Tighten and loosen nuts and bolts with the open end or the polygonal ring end.
Drill and chisel concrete and masonry with the quick-release fitting of light rotary hammers.




