DeWaltThreaded rods DeWalt DFC4130150Code DFC4130150
Make tie rods, hangers and chemical anchor fixings together with nuts, washers and connectors.
Accessories collection:Drill Bits for Granite, Masonry and ConcreteHammer Drills, Drill Drivers and Rotary HammersScrewdriving Inserts and Bits
All DeWalt products
Galvanised concrete screw HANGERMATE DeWalt DFM1450003
Key features
- TypeHANGERMATE concrete screw with internal thread for threaded rods
- Finishgalvanised
- UseVertical suspension of steel threaded rods from the ceiling
- Equipment supplieddedicated installation sleeve
- StandardETA
What it is
Galvanised concrete screw HANGERMATE DeWalt DFM1450003. Key specifications: type HANGERMATE concrete screw with internal thread for threaded rods, finish galvanised, use Vertical suspension of steel threaded rods from the ceiling.
A concrete screw is a screw anchor that is driven directly into the hole in concrete or masonry, cutting its own thread, without a plug.
What it is for
Used for mechanical fixing of structures and components to walls, ceilings and floors, for installing building services and plant and for supporting pipework and ductwork.
How to use it
Drill with a bit of the diameter specified for the screw to the required depth and clean the hole thoroughly. Drive the screw through the part being fixed with a spanner or impact driver until it is seated, without overtightening. Observe the edge distances and hole spacings stated in the technical data sheet.
Where it is used
- Commercial construction
- Building services
- Industrial plant engineering
Technical data
- Type: HANGERMATE concrete screw with internal thread for threaded rods
- Finish: galvanised
- Use: Vertical suspension of steel threaded rods from the ceiling
- Equipment supplied: dedicated installation sleeve
- Standard: ETA
Who it is for
Designed for electricians, plumbers, HVAC technicians and heating and plumbing engineers.
Related products
- BLUE-TIP screws DeWalt
- Galvanised concrete screw HANGERMATE DeWalt DFM1450002
- SDS-plus XLR full-head bit 6x210x150mm DeWalt DT8914-QZ — from the category Drill Bits for Granite, Masonry and Concrete
- Compact impact driver, 1/4" drive, XR 12V, 2x2.0 Ah, DeWalt — from the category Impact Drivers (Hex Drive)
- Short impact socket 1/2" 14mm DeWalt DT7532-QZ — from the category Impact Sockets
- Browse the whole category: Concrete Screws (Screw Anchors)
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 6
| Item code | DFM1450003 |
|---|---|
| Type | HANGERMATE concrete screw with internal thread for threaded rods |
| Finish | galvanised |
| Use | Vertical suspension of steel threaded rods from the ceiling |
| Equipment supplied | dedicated installation sleeve |
| Standard | ETA |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
DeWaltSDS-plus bit 10x310mm DeWalt DT9646-QZCode DT9646-QZ
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.
DeWaltCompact hydraulic impact driver, 3-mode, 18V XR Brushless...
Drive long screws and bolts with rotary impacts without twisting the wrist.
DeWaltImpact Ready nut socket 13mm DeWalt DT7467-QZCode DT7467-QZ
Transmit the torque of the impact driver to nuts and bolts without breaking.