Thin paints and enamels, clean tools and strip old paint.

High-pressure airless hose Dino Power DP-637H
Key features
- Operating pressure (bar)200
- Burst pressure (bar)600
- Internal diameter (mm)6,3
- External diameter (mm)12,3
- Bursting (bar)600
- ReinforcementSingle-layer steel wire, 0.25 mm, at the centre of the pipe
What it is
The DP-637H from Dino Power is a high-pressure airless paint spraying hose, to be fitted between pump and gun. It has an internal diameter of 6.3 mm (1/4") and an external diameter of 12.3 mm, an inner layer of high-density resin, a single-layer 0.25 mm steel wire reinforcement in the middle of the wall and a transparent outer sheath. It is rated for 200 bar working pressure and 600 bar burst pressure.
The high-pressure fluid hose connects the pump to the gun and carries the paint; for electrostatic painting it is also available in a conductive version.
What it is for
Used for tool maintenance, keeping tools sharp and efficient, for painting interiors and exteriors and for coating wood, metal and masonry surfaces.
How to use it
Choose a hose with a maximum pressure and diameter suited to the pump. Screw it onto the fittings without twisting it, avoiding tight bends and crushing. Release the pressure from the system before disconnecting it. Replace it if the sheath is cracked, swollen or damaged.
Where it is used
- Commercial construction
- Residential construction
- Renovation
Technical data
- Operating pressure (bar): 200
- Burst pressure (bar): 600
- Internal diameter (mm): 6,3
- External diameter (mm): 12,3
- Bursting (bar): 600
- Reinforcement: Single-layer steel wire, 0.25 mm, at the centre of the pipe
- Inner layer: High-density resin
- Outer layer: Clear resin
Who it is for
Designed for decorative finishers, painters and decorators and construction painters.
Related products
- Suction hose for airless pumps 390/395/490/595/695 Dino Power
- Airless line striping machine X32L with 2 hydraulic control guns Dino Power
- Washi paper tape, gold — from the category Paper Masking Tapes
- Filter 202 A2P3 R Neri 151251 — from the category Dust and Gas Respirators
- Nitro thinner Colorificio Adriatico — from the category Solvents and Thinners for Paints and Coatings
- Browse the whole category: Misting and Spraying Systems
Before you order
In your request, please state the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 9
| Item code | DP-637H |
|---|---|
| Operating pressure (bar) | 200 |
| Burst pressure (bar) | 600 |
| Internal diameter (mm) | 6,3 |
| External diameter (mm) | 12,3 |
| Bursting (bar) | 600 |
| Reinforcement | Single-layer steel wire, 0.25 mm, at the centre of the pipe |
| Inner layer | High-density resin |
| Outer layer | Clear resin |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Colour and protect interior and exterior walls and the building's other surfaces.
Shield floors, furniture and surfaces from paint, dust and knocks during works.
For safety
Protect the airways from dust, fumes, gases and vapours during work.
Protect the body and clothing from dust, splashes and dirt; disposable after use.





