Pump out and transfer dirty water containing light sludge, suspended solids and wastewater.

Oil alarm device Rototec
Key features
- ModelKTAOIL
- Equipment suppliedBlow-moulded PE probe/float switch, wall-mounted audible-visual alarm, 2 independent relay outputs
- StandardATEX/EX approved probe
- Cableblue, suitable for immersion in hydrocarbons
- Useoil-level alarm in oil separators/hydrocarbon separators
What it is
The oil alarm device is an oil level detection system for oil separators: it uses an ATEX/EX-approved probe/float switch and an audible and visual alarm to alert managers, designers and technicians when the intervention threshold is reached. The probe floats on water but not on hydrocarbons; the control panel signals the status and offers dedicated relay outputs.
The oil separator is a unit that retains oils and light hydrocarbons from the wastewater of yards, workshops and washing areas, letting the treated water flow out.
What it is for
Used for filtering system water and in the installation and maintenance of plumbing systems.
How to use it
Install it upstream of the discharge point on a levelled bedding, with the inlet and outlet connected in the direction of flow. Inspect it regularly and have the collected oil removed before it fills the chamber. Recovered oil is disposed of as special waste and must not be discharged into the sewer.
Where it is used
- Building services
- Water engineering works
Technical data
- Model: KTAOIL
- Standard: ATEX/EX approved probe
- Cable: blue, suitable for immersion in hydrocarbons
- Use: oil-level alarm in oil separators/hydrocarbon separators
Who it is for
Designed for plumbers.
Standards and safety
ATEX/EX (level controller/float switch)
Related products
- Audible and visual alarm device for lifting stations Rototec
- Tubular diffuser Ifadnt600 Rototec
- Round inspection chamber with tap — from the category Inspection Chambers
- Submersible pump SP 16.000 Dirt Kärcher — from the category Submersible Wastewater Pumps
- Miniature circuit breaker, Friggeri FR-MG316/10 — from the category Distribution Boards and Protection Devices
- Browse the whole category: Water Purification
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 5
| Model | KTAOIL |
|---|---|
| Equipment supplied | Blow-moulded PE probe/float switch, wall-mounted audible-visual alarm, 2 independent relay outputs |
| Standard | ATEX/EX approved probe |
| Cable | blue, suitable for immersion in hydrocarbons |
| Use | oil-level alarm in oil separators/hydrocarbon separators |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Pump out muddy water with sand and debris from excavations, sumps and flooded rooms.
Eliminate or mask bad odours from portable toilets, waste, drains and rooms.
Distribute power on site and protect people and tools from overloads and earth leakage.





