CSC EdiliziaAnchor for Scaffolding, CSC Edilizia 120W2Code 120W2
Join, tie to the wall and complete fixed tube-and-fitting or frame scaffolding.
All Marcegaglia products
Multidirectional scaffolding with octagonal node Marcegaglia
Key features
- Knot typeOctagonal (8 directions), pitch 500 mm
- MaterialSteel, hot-dip galvanised
- Available clear openings1.800 mm, 2.500 mm, 3.000 mm
- ConnectionsQuick-coupling type, welded to transoms, ledgers and diagonal braces
- Compatible withSM8 site stair tower (all variants,
What it is
Multidirectional scaffolding with octagonal node Marcegaglia. Key specifications: knot type Octagonal (8 directions), pitch 500 mm, material Steel, hot-dip galvanised, connections Quick-coupling type, welded to transoms, ledgers and diagonal braces.
Multidirectional scaffolding is a modular system with uprights fitted with nodes or rosettes, to which ledgers and diagonal braces are connected in several directions, allowing scaffolds to be erected quickly.
What it is for
Used for work at height, where access and restraint must be ensured for the whole job and for erecting scaffolding.
How to use it
It must be erected by trained personnel following the manual and the PiMUS (scaffold assembly, use and dismantling plan). Insert the ledgers into the nodes, lock them with the wedge or pin, and check the connection at every level, then tie the scaffold to the facade.
Where it is used
- Commercial construction
- Industrial construction
- Residential construction
Technical data
- Knot type: Octagonal (8 directions), pitch 500 mm
- Material: Steel, hot-dip galvanised
- Connections: Quick-coupling type, welded to transoms, ledgers and diagonal braces
- Compatible with: SM8 site stair tower (all variants, §2.7)
- Connection type: Bushing type or pawl type
- Applications/sectors of use: Decking on linear façades, construction and maintenance work
- Surface: Anti-slip studded finish
- Hooks: High-strength hooks
- Fixing: Wedge system
- Load class: High
- Compliance regulation: EN 12811
- Joint type: Cold-stamped
- Pipe material: Marcegaglia-certified steel
- Frame material: Aluminium
Who it is for
Designed for foremen and team leaders, formwork carpenters and construction workers.
Related products
- Galvanised scaffold tube Mafi
- Painted scaffold tube Mafi
- Scaffolding tube cap — from the category Fixed Scaffolding Accessories
- Suspended outdoor netting La Rete — from the category Scaffold Netting
- 2-point harness, Portwest FP12 — from the category Fall Arrest Harnesses
- Browse the whole category: Galvanised Fixed Scaffolding
Before you order
In your request, please state the rated load or flow rate, the connection type and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 66
| Knot type | Octagonal (8 directions), pitch 500 mm |
|---|---|
| Material | Steel, hot-dip galvanised |
| Available clear openings | 1.800 mm, 2.500 mm, 3.000 mm |
| Connections | Quick-coupling type, welded to transoms, ledgers and diagonal braces |
| Compatible with | SM8 site stair tower (all variants, §2.7) |
| Connection type | Bushing type or pawl type |
| Applications/sectors of use | Decking on linear façades, construction and maintenance work |
| Surface | Anti-slip studded finish |
| Hooks | High-strength hooks |
| Fixing | Wedge system |
| Load class | High |
| Compliance regulation | EN 12811 |
| Joint type | Cold-stamped |
| Pipe material | Marcegaglia-certified steel |
| Frame material | Aluminium |
| Configurations | Single-pitch or double-pitch |
| Maximum length (m) | 30 |
| Handling | Sliding rails; manual or motorised mode with remote control |
| Reaction to fire, tarpaulin | Class 2 fire-retardant materials |
| Performance | Wind resistance, waterproofness |
| Customisation | Printable tarpaulin with company logo (brandable) |
| Installation type | Temporary or permanent |
| Components | Uprights + modular panels |
| Reusability | High number of reuses |
| Production regulation common to all models | UNI EN 12811-1:2004 |
| Multilingual catalogue subtitle | "SAFE, MODULAR VERTICAL ACCESS FOR EVERY SITE" |
| Useful capacity | 3,00 kN/m² |
| Rise (mm) | 200 |
| Steel tread depth (mm) | 250 |
| Aluminium tread depth (mm) | 230 |
| Net steel width (mm) | 645 |
| Net aluminium width (mm) | 670 |
| Ladder 730x2500, ramp height 2 m, galvanised steel (kg) | 107,5 |
| Ladder 730x2500, ramp height 1 m, galvanised steel (kg) | 55 |
| Ladder 750x2500, ramp height 2 m, aluminium (kg) | 41 |
| Ladder 750x2500, ramp height 1 m, aluminium (kg) | 25 |
| 2 m storey height, steel and aluminium | 4120 (810+2500+810) x 1800 mm |
| 3 m storey height, steel | 4120 (810+2500+810) x 1800 mm |
| 3 m storey height, aluminium only | 4120 (810+1140+1360+810) x 1800 mm |
| Applications in publicly accessible structures | Grandstands; stages; safety stairs for stadiums, schools, shopping centres; walkways; overpasses |
| Max useful capacity | 4,00 kN/m² |
| Step rise (mm) | 167 |
| Step tread depth (mm) | 300 |
| Net passage width (mm) | 1350 |
| Ladder 1200x1800, 6 steps, galvanised steel (kg) | 95,18 |
| Ladder 1200x900, 3 steps, galvanised steel (kg) | 48,21 |
| Ladder 1200x600, 2 steps, galvanised steel (kg) | 32,23 |
| Ladder 1200x300, 1 step, galvanised steel (kg) | 16,96 |
| Ramps 1800x1800, 2 m floor height, 1-step start | 6600 (1500+1800+1800+1500) x 3500 mm |
| Ramps 1800x900, 3 m floor height, 1-step start | 5700 (1500+1800+0,9+1500) x 3500 mm |
| Ramps 1800x1800, 2 m floor height, 2-step start | 6600 (1500+1800+1800+1500) x 3500 mm |
| Ramps 1800x900, 3 m floor height, 2-step start | 5700 (1500+1800+0,9+1500) x 3500 mm |
| Min step tread depth (mm) | 260 |
| Min net passage width (mm) | 600 |
| Ladder 1800x1800 ramp, galvanised steel (kg) | 43,7 |
| Plan-view dimensions | Floor-to-floor height 2 m → 1800x1800 mm. |
| Ramp 1800x2000, galvanised steel (kg) | 41,02 |
| Ramp 900x1000, galvanised steel (kg) | 19,94 |
| 2 m storey height | 3300 (750+1800+750) x 1500 mm |
| 3 m storey height | 3300 (750+900+900+750) x 1500 mm |
| Ladder 660x2500, ramp height 2000 (kg) | 35 |
| Ladder 660x2500, ramp height 1000 (kg) | 35 |
| Max capacity (kg) | up to 2,000 |
| Function | Handling of people and materials |
| Component manufacturer | Maber (long-standing partner, over 30 years in business) |
| Products/systems that can be made | Grandstands, stages, lighting towers, large-span roofing |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
VigorScaffold netting, eyeleted, green, 25 m, H. 180 cm, VigorCode 00710-18
Enclose and screen scaffolding and structures, containing dust and falling materials.
IrudekAdjustable fall-arrest lanyard with energy absorber Astun...Code 100113200017
Connect the harness to the anchor and absorb the jolt in the event of a fall from height.
For safety
NeriScaffolding kit, Basic, Neri 121367Code 121367
Protect against falls from height by supporting the body during work at height.
MassProtective helmet for scaffolding MassCode elmetti-mass
Protect the head from impacts and falling objects on site.