Shore A rubber test specimens Fervi P013

What it is

Fervi P013 Shore A rubber test pieces are reference samples used for the practical checking and calibration of durometers operating on the Shore A scale, typically used to measure the hardness of rubbers and elastomers. They are a useful control element for verifying that the instrument responds correctly before measurements are taken. The pack has a gross weight of 0.38 kg and packaging dimensions of 175 x 60 x 95 mm.

Test anvils and test blocks are calibration references used to check that rebound hammers and hardness testers give correct readings.

What it is for

Used in quality control of parts and workmanship and for measuring on site and in the workshop.

How to use it

Place them on a stable, flat surface and carry out the test on them with the instrument. If the reading deviates from the stated value, the instrument must be adjusted or sent for verification. Keep them clean and protected from impact and rust.

Where it is used

• Mechanical engineering industry
• Mechanical workshops

Technical data

• Gross weight (kg): 0,38
• Packaging dimensions (mm): 175 × 60 × 95

Who it is for

Designed for mechanics.

Related products

• Rebound hammer Fervi S110
• Digital torque meter Fervi 0268A
• Batteries for digital instruments Fervi CR2032 — from the category Household Batteries
• Portable digital temperature meter Fervi T063 — from the category Thermometers and Weather Stations
• Outside micrometer, 0.01 mm Fervi M009/900/1000 — from the category Analogue Distance Measuring Tools
• Browse the whole category: Precision Instruments for Measuring Time, Weight and Force

Before you order

Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.