DeWaltCobalt HSS-E drill bits 10mm loose x10 DeWalt DT4942-QZCode DT4942-QZ
Drill steel, cast iron, non-ferrous metals and plastic with a drill or drill driver.
Accessories collection:Hammer Drills, Drill Drivers and Rotary HammersIndustrial Lubrication and Technical Greases
All Fervi products
Centre drill Fervi P056/1
Also known as: center drill
Key features
- Diameter (mm)1
- Point angle118°
- Taper angle60°
- StandardDIN 333
What it is
The Fervi P056/1 centre drill is a cutting tool intended for making centre holes before drilling or turning. With a diameter of Ø 1 mm, a 118° point angle and a 60° taper angle, it creates an accurate, repeatable lead-in for the twist drill or the tailstock centre. Compliance with DIN 333 standardises its geometry and tolerances. The product is of certified Italian manufacture and complies with Machinery Directive 2006/42/EC with CE marking.
A metal drill bit is an HSS or cobalt twist drill, with a straight or taper shank, for drilling steel, non-ferrous metals and plastics.
What it is for
Used for drilling steel, stainless steel and aluminium, on a pillar drill or with a hand-held drill and in workshop machining of steel, aluminium and alloy parts.
How to use it
Clamp the workpiece in a vice, mark the centre and set the speed for the diameter and material: low for hard steels and large diameters, higher for aluminium and plastic. Lubricate with cutting oil on steel; on plastic, reduce the pressure as the bit breaks through to avoid chipping. Insert taper-shank drills into the pillar drill's spindle taper and remove them with a drift.
Where it is used
- Mechanical engineering industry
- Mechanical workshops
Technical data
- Diameter (mm): 1
- Point angle: 118°
- Taper angle: 60°
- Standard: DIN 333
Who it is for
Designed for metal fabricators, industrial maintenance technicians and mechanics.
Related products
- Centre drill Fervi P056/1.6
- Ground cylindrical drill bit Fervi P064/13.00
- Bench mill-drill Fervi T046 — from the category Pillar Drills
- Steel bench vice Fervi 0140/125 — from the category Vices and Clamps
- External turning tool with inserts Fervi KITSCLCR20E — from the category Turning, Milling and Threading Tools
- Browse the whole category: Professional Drill Bits for Metal and Plastic
Before you order
In your request, please state the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 4
| Diameter (mm) | 1 |
|---|---|
| Point angle | 118° |
| Taper angle | 60° |
| Standard | DIN 333 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
FerviBelt-driven pillar drill Fervi T072Code T072
Drill precise, perpendicular holes with the workpiece clamped beneath the bit.
FerviSet of taps and drill bits Fervi M015SCode M015S
Mill, thread and cut metal when fitted to a lathe or milling machine or used by hand.
FerviAdhesive lubricant for chains Fervi S401/15Code S401/15
Lubricate, free up and protect against rust when sprayed directly onto the part.