Geared bench mill-drill Fervi T058

What it is

The Fervi T058 is a compact gear-drive bench drilling and milling machine, suited to workshops, advanced hobbyists and small shops that need precise metalworking in limited space. It drills S235JR steel up to Ø 13 mm with a pilot hole, mills up to Ø 30 mm with an insert cutter (Ø 16 mm with a cylindrical cutter) and has a Morse taper CM 3 connection with a B16 chuck from 3 to 16 mm. The two speed ranges cover 50 to 1100 rpm and 120 to 2500 rpm (± 10%); the head travel is 210 mm and the head tilts by ± 45°. The 0.55 kW motor runs on 230 V (50/60 Hz).

A pillar drill is a stationary drilling machine on a column or magnetic base for accurate, perpendicular holes; this category also includes chucks and drill vices.

What it is for

Used for drilling steel, stainless steel and aluminium, on a pillar drill or with a hand-held drill, for milling faces, shoulders and slots on machine tools and in workshop machining of steel, aluminium and alloy parts.

How to use it

Clamp the workpiece in the vice, or fix the magnetic base to clean steel; never hold the workpiece by hand. Fit the bit in the chuck and tighten it firmly, set the speed according to diameter and material and drill with a steady feed, using coolant on metals. Wear safety glasses, no gloves near the chuck, and keep sleeves and hair tied back.

Where it is used

• Mechanical engineering industry
• Mechanical workshops

Technical data

• Maximum drilling capacity in steel with pilot hole, S235JR (mm): Ø 13
• Routing capacity with insert cutter (mm): Ø 30
• Routing capacity with cylindrical cutter (mm): Ø 16
• Morse taper: CM 3
• Chuck: 3 ÷ 16 mm B16
• Spindle speed: I 50 ÷ 1100 rpm ±10% | II 120 ÷ 2500 rpm ±10%
• Spindle rotation: Dx
• Head travel (mm): 210
• Head tilt: ±45°
• Table size: 430 x 110 mm
• Distance between machine nose and table (mm): 290
• Groove (mm): 12
• Longitudinal table movement (mm): 130
• Cross table movement (mm): 250

Who it is for

Designed for industrial maintenance technicians and mechanics.

Related products

• Geared bench mill-drill Fervi T059/16V
• Geared bench mill-drill Fervi T044/400V
• Cobalt HSS-E drill bits 4.8mm loose x10 DeWalt DT4928-QZ — from the category Metal Drill Bits
• Bimetal hole saw, variable pitch, Fervi 0278/016 — from the category Professional Hole Saws and Hole Cutters
• Polycarbonate safety spectacles 5X8-CLEAR Plus Neri 162101 — from the category Safety Glasses, Goggles and Face Shields
• Browse the whole category: Pillar Drills

Before you order

Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.