Anchor heavy loads to concrete and solid masonry, where plastic plugs are not enough.

Fixed-point collar FFPC Fischer
Also known as: pipe clamp, pipe clip
Key features
- Nominal size1/2 in
- Clamping range D (mm)21
- Width B (mm)91,7
- Height h (mm)45,4
- Width x thickness, collar band40 x 4,0 mm
- Locking screwM16
What it is
The Fischer FFPC fixed-point clamp is a robust fixing system designed to restrain pipes at fixed points. It is sized for nominal size 1/2", with a clamping range of 21 mm, width of 91.7 mm and height of 45.4 mm, and is fitted with a 40 x 4.0 mm clamp band with M16 locking screw. The recommended tightening torque is 60 N·m and the connection uses an M16 thread. The pack contains 2 pieces.
A pipe clip is a metal or plastic band, often with a rubber insert, that wraps around a pipe and fixes it to a wall, a ceiling or a rail with a screw, wall plug or threaded rod. Light, heavy-duty, noise- and heat-insulating versions are available, as well as versions for downpipes and flues.
What it is for
Used for installing building services and plant and for supporting pipework and ductwork.
How to use it
Choose a clip with the diameter of the pipe and the right load rating. Fix it to the support with the right anchor, insert the pipe and tighten the screw until it holds the pipe without crushing it. Versions with a rubber insert dampen vibration and noise. On lines that expand with temperature, leave the movement free on the sliding clips and lock the pipe only at the fixed points.
Where it is used
- Industrial construction
- Building services
- Industrial plant engineering
Technical data
- Nominal size: 1/2 in
- Clamping range D (mm): 21
- Width B (mm): 91,7
- Height h (mm): 45,4
- Width x thickness, collar band: 40 x 4,0 mm
- Locking screw: M16
- Tightening torque Tinst: 60 N·m
- Pieces per pack: 2
- Thread: M16
Who it is for
Designed for plumbers, industrial maintenance technicians, HVAC technicians and heating and plumbing engineers.
Related products
- Fixed-point collar FFRC Fischer
- Galvanised downpipe collar Scp / SCP-V Fischer
- Percussion Anchor Zykon Fzea II, Fischer — from the category Heavy-Duty Anchors
- Threaded wall plug GS Fischer — from the category Threaded Rods
- Accessories for Autoclaved Aerated Concrete (AAC) Fischer — from the category Chemical Anchors
- Browse the whole category: Wall Brackets for Carpentry
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 9
| Nominal size | 1/2 in |
|---|---|
| Clamping range D (mm) | 21 |
| Width B (mm) | 91,7 |
| Height h (mm) | 45,4 |
| Width x thickness, collar band | 40 x 4,0 mm |
| Locking screw | M16 |
| Tightening torque Tinst | 60 N·m |
| Pieces per pack | 2 |
| Thread | M16 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Make tie rods, hangers and chemical anchor fixings together with nuts, washers and connectors.
Complete the fixing when screwed onto bolts, screws and threaded rods.
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.




