Anchor heavy loads to concrete and solid masonry, where plastic plugs are not enough.

Collar for refrigeration pipes Frsk Fischer
Also known as: pipe clamp, pipe clip
Key features
- Nominal size8 in
- Thread atM12
- Insulation thickness S AF (mm)19
- Width B (mm)311
- Height h (mm)275
- Height, Z (mm)142,5
What it is
The Fischer Frsk pipe clamp is a fixing system for refrigerated pipework, part of the range of fixings for thermal insulation. It is sized for nominal size 8", with an insulation thickness of 19 mm, width of 311 mm, height of 275 mm and Z height of 142.5 mm, over an insulating material length of 82 mm. The connection uses an M12 thread, with a maximum recommended static tensile load of 3.44 kN and a recommended tightening torque of 3 N·m. The pack contains 4 pieces.
A pipe clip is a metal or plastic band, often with a rubber insert, that wraps around a pipe and fixes it to a wall, a ceiling or a rail with a screw, wall plug or threaded rod. Light, heavy-duty, noise- and heat-insulating versions are available, as well as versions for downpipes and flues.
What it is for
Used for installing building services and plant, for thermal insulation of walls, roofs and pipework and in refrigeration systems.
How to use it
Choose a clip with the diameter of the pipe and the right load rating. Fix it to the support with the right anchor, insert the pipe and tighten the screw until it holds the pipe without crushing it. Versions with a rubber insert dampen vibration and noise. On lines that expand with temperature, leave the movement free on the sliding clips and lock the pipe only at the fixed points.
Where it is used
- Building services
- Industrial plant engineering
Technical data
- Nominal size: 8 in
- Thread at: M12
- Insulation thickness S AF (mm): 19
- Width B (mm): 311
- Height h (mm): 275
- Height, Z (mm): 142,5
- Insulation material length (mm): 82
- Maximum recommended static tensile load, CE (kN): 3,44
- Tightening torque Tinst: 3 N·m
- Pieces per pack: 4
- Thread: M8
Who it is for
Designed for refrigeration engineers, HVAC technicians and heating and plumbing engineers.
Related products
- Pipe collar with silicone seal FRSH Fischer
- Pipe collar FRX A2 Fischer
- SXRL-T fixing system Fischer — from the category Heavy-Duty Anchors
- Threaded rod G HDG Fischer — from the category Threaded Rods
- Chemical fixing, fill & fix Fischer — from the category Chemical Anchors
- Browse the whole category: Wall Brackets for Carpentry
Before you order
In your request, please state the length and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 11
| Nominal size | 8 in |
|---|---|
| Thread at | M12 |
| Insulation thickness S AF (mm) | 19 |
| Width B (mm) | 311 |
| Height h (mm) | 275 |
| Height, Z (mm) | 142,5 |
| Insulation material length (mm) | 82 |
| Maximum recommended static tensile load, CE (kN) | 3,44 |
| Tightening torque Tinst | 3 N·m |
| Pieces per pack | 4 |
| Thread | M8 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Make tie rods, hangers and chemical anchor fixings together with nuts, washers and connectors.
Complete the fixing when screwed onto bolts, screws and threaded rods.
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.




