Anchor heavy loads to concrete and solid masonry, where plastic plugs are not enough.

Heavy-duty pipe collar FRSM, metric thread, Fischer
Also known as: heavy-duty pipe clamp
Key features
- Thread atM10 / M12
- Clamping range D (mm)100 - 106
- Width B (mm)171
- Height h (mm)143
- Height, Z (mm)82
- Width x thickness, collar band30 x 3,0 mm
What it is
The Fischer FRSM heavy-duty pipe clamp with metric thread is a fixing from the heavy-duty range with a clamping range of 100 to 106 mm, a width of 171 mm, a height of 143 mm and a 30 x 3.0 mm clamp band. The M10 and M12 threaded connections, the M8 locking screw and the maximum CE-certified recommended static tensile load of 3 kN make it a support suitable for large-diameter pipes, with an installation tightening torque of 3 N·m.
A pipe clip is a metal or plastic band, often with a rubber insert, that wraps around a pipe and fixes it to a wall, a ceiling or a rail with a screw, wall plug or threaded rod. Light, heavy-duty, noise- and heat-insulating versions are available, as well as versions for downpipes and flues.
What it is for
Used for installing building services and plant and for supporting pipework and ductwork.
How to use it
Choose a clip with the diameter of the pipe and the right load rating. Fix it to the support with the right anchor, insert the pipe and tighten the screw until it holds the pipe without crushing it. Versions with a rubber insert dampen vibration and noise. On lines that expand with temperature, leave the movement free on the sliding clips and lock the pipe only at the fixed points.
Where it is used
- Industrial construction
- Building services
- Industrial plant engineering
Technical data
- Thread at: M10 / M12
- Clamping range D (mm): 100 - 106
- Width B (mm): 171
- Height h (mm): 143
- Height, Z (mm): 82
- Width x thickness, collar band: 30 x 3,0 mm
- Locking screw: M8
- Maximum recommended static tensile load, CE (kN): 3
- Tightening torque Tinst: 3 N·m
- Pieces per pack: 20
- Thread: M10
Who it is for
Designed for plumbers, industrial maintenance technicians, HVAC technicians and heating and plumbing engineers.
Related products
- Heavy-duty pipe collar FRSM HDG - metric thread, Fischer
- Heavy-duty pipe collar FRSM - metric thread, Fischer
- Mounting Accessory FTP EK Fischer — from the category Heavy-Duty Anchors
- Threaded wall plug GS Fischer — from the category Threaded Rods
- Chemical Anchor FIS VS Plus (PowerPack), Fischer — from the category Chemical Anchors
- Browse the whole category: Wall Brackets for Carpentry
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 11
| Thread at | M10 / M12 |
|---|---|
| Clamping range D (mm) | 100 - 106 |
| Width B (mm) | 171 |
| Height h (mm) | 143 |
| Height, Z (mm) | 82 |
| Width x thickness, collar band | 30 x 3,0 mm |
| Locking screw | M8 |
| Maximum recommended static tensile load, CE (kN) | 3 |
| Tightening torque Tinst | 3 N·m |
| Pieces per pack | 20 |
| Thread | M10 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Make tie rods, hangers and chemical anchor fixings together with nuts, washers and connectors.
Complete the fixing when screwed onto bolts, screws and threaded rods.
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.




