FischerConcrete anchor UltraCut FBS II 6 M8/19-M10/21-M8/M10 Fis...Code 4048962329537
Anchor heavy loads to concrete and solid masonry, where plastic plugs are not enough.
All Fischer products
Seismic system for the seismic bracing of plant and equipment Fischer
Key features
- RegulationsETA, EAD, EN 1992-4, Reg. UE 305/2011 (CPR)
- ThreadM10
What it is
The Seismic system for seismic bracing of building services Fischer is a solution designed to support services in areas subject to seismic action, fitted with an M10 thread. The system is designed to ensure the stability and safety of the service supports even under dynamic stresses, providing a specific answer to seismic requirements.
Wall-mounted support brackets are steel brackets, channels, pipe clamps and fixed points for supporting pipework, cable trays and services on walls or ceilings.
What it is for
Used for installing building services and plant and for supporting pipework and ductwork.
How to use it
Mark out the route of the services and fix the brackets or channels with anchors suited to the substrate and load. Fit pipe clamps and clips to the channels at the spacings specified by the designer or manufacturer, then insert the pipes and tighten the clamps without crushing them. Position fixed points where the pipe must be held in place, leaving the other clamps free to accommodate expansion.
Where it is used
- Industrial construction
- Residential construction
- Building services
Technical data
- Regulations: ETA, EAD, EN 1992-4, Reg. UE 305/2011 (CPR)
- Thread: M10
Who it is for
Designed for electricians and plumbers.
Related products
- Fixed-angle mounting bracket Fma Fischer
- Heavy-duty Fms installation system Fischer
- Extended fixing VBS Fischer — from the category Heavy-Duty Anchors
- Threaded rod by the metre, class 8.8, Fischer — from the category Threaded Rods
- Chemical Anchor FIS P PLUS, Fischer — from the category Chemical Anchors
- Browse the whole category: Wall Brackets for Carpentry
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 2
| Regulations | ETA, EAD, EN 1992-4, Reg. UE 305/2011 (CPR) |
|---|---|
| Thread | M10 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
FischerThreaded rod by the metre, class 8.8, FischerCode 8001132038505
Make tie rods, hangers and chemical anchor fixings together with nuts, washers and connectors.
FischerLocking nut FTRC FischerCode 4048962556018
Complete the fixing when screwed onto bolts, screws and threaded rods.
FischerConcrete drill bit SDX FischerCode 4048962249293
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.