FischerConcrete screw UltraCut FBS II 6 US hex head FischerCode 4048962329513
Fix to concrete and masonry by screwing directly into the hole, without a wall plug.
Accessories collection:Drill Bits for Granite, Masonry and ConcreteRotary Hammers (or Hammer Drills)Chemical Anchors
All Fischer products
Tool SC-ST for installing concrete connectors UltraCut Fischer
Key features
- RegulationsETA, EAD, EN 1992-4, Reg. UE 305/2011 (CPR)
- Support materialsgalvanised steel
- Quantity (pcs)1
What it is
Tool SC-ST for installing concrete connectors UltraCut Fischer. Key specifications: regulations ETA, EAD, EN 1992-4, Reg. UE 305/2011 (CPR), support materials galvanised steel, quantity (pcs) 1.
The setting tool is the installation tool used to expand anchors, by striking the ring or the base: it is pushed into the anchor and struck with a hammer, or inserted into the hammer drill.
What it is for
Used for repetitive screwdriving into wood, metal and plasterboard, where torque and consistency matter, for strengthening masonry and concrete structures and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Choose the setting tool suited to the diameter and type of anchor, push it into the anchor and strike or operate it until it reaches the stop. Wear safety glasses and gloves. Check that the tip is in good condition and that the anchor is fully expanded.
Where it is used
- Commercial construction
- Residential construction
- Renovation
Technical data
- Regulations: ETA, EAD, EN 1992-4, Reg. UE 305/2011 (CPR)
- Support materials: galvanised steel
- Quantity (pcs): 1
Who it is for
Designed for formwork carpenters, concrete workers and bricklayers.
Related products
- DuoXpand plugs
- Tool SC-ST for installing concrete connectors UltraCut FBS II Fischer
- Concrete drill bit SDS Plus Quattric II Fischer — from the category Drill Bits for Granite, Masonry and Concrete
- Cordless rotary hammer M18 BLHX Milwaukee — from the category Rotary Hammers
- Chrome combination spanners, polished, Fervi 0208/23 — from the category Combination Spanners
- Browse the whole category: Heavy-Duty Anchors
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 3
| Regulations | ETA, EAD, EN 1992-4, Reg. UE 305/2011 (CPR) |
|---|---|
| Support materials | galvanised steel |
| Quantity (pcs) | 1 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
DeWaltCordless impact wrench 18V XR brushless 3/4" Hog Ring dri...Code DCF964NT-XJ
Tighten and free nuts and bolts with sockets thanks to rotary impact action.
DeWaltMagnetic hex socket 50mm DeWalt DT7402-QZCode DT7402-QZ
Transmit the torque of the impact driver to nuts and bolts without breaking.
FischerConcrete drill bit SDS Plus II Pointer V FischerCode 4048962211764
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.