HSS hole saws

What it is

HSS hole saws. Key specifications: material HSS-G, use sheet metal in steel, iron and alloys.

A hole saw is a toothed cup which, fitted to a drill with an arbor and pilot drill, cuts large-diameter holes in wood, metal, plastic and plasterboard.

What it is for

Used for drilling steel, stainless steel and aluminium, on a pillar drill or with a hand-held drill and in metalworking.

How to use it

Fit the hole saw to the arbor with the pilot drill and tighten it in the chuck, setting a lower speed for large diameters and for metal. Centre the hole with the pilot drill and drill square to the surface without hammer action, lubricating on metal. Remove the slug left in the hole saw with the machine stopped, using a screwdriver through the slots.

Where it is used

• Building services

Technical data

• Material: HSS-G
• Use: sheet metal in steel, iron and alloys

Who it is for

Designed for electricians, plumbers, industrial maintenance technicians and heating and plumbing engineers.

Related products

• Kit, 9-piece hole saws, extension bars and bits
• Arbor for Hole Saws, art. 45319
• Cordless screwdriver — from the category Drill Drivers
• Drill bits HSS-G DIN 338 for metal 6.5 mm, single pack in blister DeWalt DT5217-QZ — from the category Metal Drill Bits
• Belt-driven bench drill Fervi 0750 — from the category Pillar Drills
• Browse the whole category: Hole Saws

Before you order

Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.