FischerConcrete drill bit SDS Plus II Pointer V FischerCode 4048962211764
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.
Accessories collection:Drill Bits for Granite, Masonry and ConcreteRotary Hammers (or Hammer Drills)Chemical Anchors
All Fischer products
FSU anchors (pre-set installation) Fischer
Key features
- TypeSelf-cutting undercut anchor, pre-set installation
- ThreadM10, M12, M16
- Hole diameters (mm)20, 22, 30
- Lengths (mm)150, 190, 210, 275, 295
- StandardETA-22/0674; seismic C1 / C2
- SupportsConcrete C20/25 to C50/60, cracked and non-cracked
What it is
FSU anchors (pre-set installation) Fischer. Key specifications: type Self-cutting undercut anchor, pre-set installation, thread M10, M12, M16, hole diameters (mm) 20, 22, 30.
Heavy-duty fixings are steel or reinforced nylon anchors that carry high loads in concrete and solid masonry.
What it is for
Used for anchoring shelves, brackets and structures to walls, for mechanical fixing of structures and components to walls, ceilings and floors and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Drill with a bit of the specified diameter to the required depth, then clean the hole with a brush and blow-out pump. Insert the anchor through the part to be fixed, hammering it in if necessary, and tighten the nut with a torque wrench to the torque specified by the manufacturer. Observe the minimum edge distances and spacings stated in the technical data sheet.
Where it is used
- Industrial construction
- Residential construction
- Building services
Technical data
- Type: Self-cutting undercut anchor, pre-set installation
- Thread: M10, M12, M16
- Hole diameters (mm): 20, 22, 30
- Lengths (mm): 150, 190, 210, 275, 295
- Standard: ETA-22/0674; seismic C1 / C2
- Supports: Concrete C20/25 to C50/60, cracked and non-cracked
Who it is for
Designed for electricians, metal fabricators and plumbers.
Related products
- FSU-P anchors (through installation) Fischer
- FNA II M C anchors (high corrosion-resistance steel C 1.4529, threaded stud and nut) Fischer
- Concrete drill bit SDX Fischer — from the category Drill Bits for Granite, Masonry and Concrete
- Cordless rotary hammer brushless SDS Plus 18V Fatmax V20 - 4.0Ah (SFMCH900M22-QW) Stanley — from the category Rotary Hammers
- Combination spanner 8 mm MAX BITE Milwaukee 4932471516 — from the category Combination Spanners
- Browse the whole category: Heavy-Duty Anchors
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 6
| Type | Self-cutting undercut anchor, pre-set installation |
|---|---|
| Thread | M10, M12, M16 |
| Hole diameters (mm) | 20, 22, 30 |
| Lengths (mm) | 150, 190, 210, 275, 295 |
| Standard | ETA-22/0674; seismic C1 / C2 |
| Supports | Concrete C20/25 to C50/60, cracked and non-cracked |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
StanleyCordless rotary hammer brushless SDS Plus 18V Fatmax V20 ...
Drill concrete, masonry and stone by combining rotation and hammer action.
FerviSet of multilock combination spanners Fervi 0187Code 0187
Tighten and loosen nuts and bolts with the open end or the polygonal ring end.
FischerSDS Plus Installation Adapter RA-SDS, Fischer
Drill and chisel concrete and masonry with the quick-release fitting of light rotary hammers.