Rotary hammer Makita HR3210C

What it is

Rotary hammer Makita HR3210C. Key specifications: absorbed power (W) 850, no load speed (rpm) 315 - 630, blows per minute (bpm) 1650 - 3300.

A rotary hammer drills concrete, masonry and stone by combining rotation and percussion, with an SDS-Plus, SDS-Max or compressed-air connection.

What it is for

Used for drilling reinforced concrete, in hammer or rotary hammer mode and for drilling solid and hollow masonry, clay brick and blocks.

How to use it

Use a detector to make sure there are no cables or pipes at the drilling point. Insert the clean, greased bit until it clicks, set the depth stop and select the operating mode. Drill with the tool held square to the surface using both hands, withdrawing the bit from time to time to clear the dust, and wear safety glasses, a dust mask and hearing protection.

Where it is used

• Building services
• Renovation

Technical data

• Absorbed power (W): 850
• No load speed (rpm): 315 - 630
• Blows per minute (bpm): 1650 - 3300
• Max hole diameter in wood (mm): 32
• Max hole diameter in concrete (mm): 32
• Max hole diameter in steel (mm): 13
• Impact power: 5,0 J

Who it is for

Designed for electricians, plumbers, building maintenance operatives and bricklayers.

Related products

• Rotary hammer Makita HR3210FCT
• Rotary hammer Makita HR3012FCJ
• Overhead drilling rotary hammer 16mm with integrated dust extractor M18 Fuel (M18 FHAFOH16) Milwaukee — from the category SDS Plus Rotary Hammers and Bits
• TCT tunnelling bit SDS-Max Milwaukee — from the category SDS Max Drill Bits
• SLM plug with hook Fischer — from the category Heavy-Duty Anchors
• Browse the whole category: Rotary Hammers

Before you order

In your request, please state the diameter, the power rating and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.