KimiaThixotropic fibre-reinforced cementitious mortar Betonfix...
Restore degraded concrete without sagging, even on vertical surfaces and overhead.
All Kimia products
Two-part filled thixotropic epoxy resin Kimitech EP-TX/311 Kimia
Key features
- ModelKimitech EP-TX/311
- LineKimitech
- RegulationsEN 1504-4 EN 1504-6
- Made in Italy100% Italian production
- Full curing at 25°C7 days
- Consistency A/BThixotropic product
What it is
Two-part filled thixotropic epoxy resin Kimitech EP-TX/311 Kimia. Key specifications: model Kimitech EP-TX/311, line Kimitech, regulations EN 1504-4 EN 1504-6.
The structural strengthening resin is an epoxy, acrylic, polyester or vinyl ester product, in one or two components, used to impregnate fabrics, bond plates and connectors or anchor bars.
What it is for
Used for strengthening masonry and concrete structures and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Two-component resins are mixed in the stated ratios until the colour is uniform and used within the working time. The substrate must be clean, dry and prepared as required. Respect the temperature limits. Work with gloves, safety glasses and good ventilation.
Where it is used
- Industrial construction
- Conservation and restoration
- Renovation
Technical data
- Model: Kimitech EP-TX/311
- Line: Kimitech
- Regulations: EN 1504-4 EN 1504-6
- Made in Italy: 100% Italian production
- Full curing at 25°C: 7 days
- Consistency A/B: Thixotropic product
- Adhesion to concrete: > 3 (substrate failure) MPa
- Impregnation resin: KIMITECH EP-TX/311
- Resin type: Epoxy
- Density (g/cm³): 1,9 ± 0,05 g/cm3
- Catalyst ratio by weight: A:B=1:1
- Workability at 10 30 min: At 0 min = 3.5 MPa
- At 15 min: 36 MPa: At 30 min = 3.6 MPa
- Pot life at 20°C, min, measured as: Pot life, EN ISO 9514
Who it is for
Designed for formwork carpenters, bricklayers and restorers.
Related products
- Two-part thixotropic epoxy resin Kimitech EP-TX Kimia
- Ultra-high-performance fluid two-component epoxy resin Kimitech EP-IN Kimia
- Thixotropic fibre-reinforced cementitious mortar Betonfix MONOLITE UR Kimia — from the category Fibre-Reinforced Thixotropic Cement Mortars
- Jointing trowel, half-round section Pavan — from the category Trowels, Spatulas and Floats
- Chemical Anchor Epcon C8Xtrem, SPIT — from the category Chemical Anchors
- Browse the whole category: FRP and FRCM Structural Strengthening Systems
Before you order
In your request, please state the dimensions and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 19
| Model | Kimitech EP-TX/311 |
|---|---|
| Line | Kimitech |
| Regulations | EN 1504-4 EN 1504-6 |
| Made in Italy | 100% Italian production |
| Full curing at 25°C | 7 days |
| Consistency A/B | Thixotropic product |
| Adhesion to concrete | > 3 (substrate failure) MPa |
| Impregnation resin | KIMITECH EP-TX/311 |
| Resin type | Epoxy |
| Density (g/cm³) | 1,9 ± 0,05 g/cm3 |
| Catalyst ratio by weight | A:B=1:1 |
| Workability at 10-30 min | At 0 min = 3.5 MPa |
| At 15 min: 36 MPa | At 30 min = 3.6 MPa |
| Pot life at 20°C, min, measured as | Pot life, EN ISO 9514 |
| Workability at 20-30 min | At 15 min = 3.3 MPa |
| At 30 min: 33 MPa | At 45 min = 2.1 MPa |
| Pot life at 35°C, min, measured as | Pot life, EN ISO 9514 |
| Workability at 35.5 min | At 0 min = 3.6 MPa |
| At 5 min: 37 MPa | Temperature range of |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
KimiaTwo-part fluid epoxy resin with very high mechanical perf...
Bond metal, plastic and concrete with joints that withstand loads and stresses.
KimiaTwo-part thixotropic styrene-free polyester resin Kimitec...Code Kimitech F3
Bond threaded rods and sleeves into the hole for heavy-duty fixings in concrete and masonry.
PavanTrowel, reinforced square point, black handle with metal ...
Spread, smooth and finish mortars, renders, adhesives and skim coats by hand.
For safety
PortwestGlove with reinforced latex thumb, Grip 10 (Pk12), Portwe...Code A106
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.