Restore degraded concrete without sagging, even on vertical surfaces and overhead.

Preformed fibre L-connector Kimitech Plug VR/HD Kimia
Key features
- ModelKimitech PLUG VR/HD
- LineKimitech
- Made in Italy100% Italian production
- ColourWhite
- MaterialFibreglass with resin
- TypesL 20x10, 30x10, 50x10 cm
What it is
Preformed fibre L-connector Kimitech Plug VR/HD Kimia. Key specifications: model Kimitech PLUG VR/HD, line Kimitech, made in Italy 100% Italian production.
The preformed connector and fibre fan are glass or carbon fibre elements that anchor the reinforcement to the structure: one end is inserted into a hole with resin and the other is fanned out over the fabric or mesh.
What it is for
Used for strengthening masonry and concrete structures and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Drill the hole, clean it thoroughly of dust and fill it with resin. Then insert the connector or fibre fan and fan out the free end over the fabric, saturating it with resin. Leave to harden before loading. Wear gloves and safety glasses.
Where it is used
- Industrial construction
- Conservation and restoration
- Renovation
Technical data
- Model: Kimitech PLUG VR/HD
- Line: Kimitech
- Made in Italy: 100% Italian production
- Colour: White
- Material: Fibreglass with resin
- Types: L 20x10, 30x10, 50x10 cm
- Nominal cross sectional area: 38 mm2
- Weight: 75 g/m
- Average tensile load (kN): 32,4
- Average tensile strength value: 854 MPa
- Elastic modulus, average value: 47.2 GPa
- Average elongation: 2,7%
- Kimitech plug vrhd: Technical data sheet rev.03_05/2026
- The product is an item: According to the definitions in the
Who it is for
Designed for formwork carpenters, bricklayers and restorers.
Related products
- Stainless steel tubular element Kimisteel INOX X-T Kimia
- Preformed fibre L-connector Kimitech Plug CRM Kimia
- Thixotropic fibre-reinforced cementitious mortar Betonfix MONOLITE UR Kimia — from the category Fibre-Reinforced Thixotropic Cement Mortars
- Grid scraper for render Pavan — from the category Trowels, Spatulas and Floats
- Cancano FIS A WH for chemical anchor Fischer — from the category Chemical Anchors
- Browse the whole category: FRP and FRCM Structural Strengthening Systems
Before you order
In your request, please state the colour and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 20
| Model | Kimitech PLUG VR/HD |
|---|---|
| Line | Kimitech |
| Made in Italy | 100% Italian production |
| Colour | White |
| Material | Fibreglass with resin |
| Types | L 20x10, 30x10, 50x10 cm |
| Nominal cross-sectional area | 38 mm2 |
| Weight | 75 g/m |
| Average tensile load (kN) | 32,4 |
| Average tensile strength value | 854 MPa |
| Elastic modulus, average value | 47.2 GPa |
| Average elongation | 2,7% |
| Kimitech plug vrhd | Technical data sheet rev.03_05/2026 |
| The product is an item | According to the definitions in the |
| EC Regulation No 1907/2006 | And therefore does not require |
| And dry, sheltered from rain | And from direct sunlight |
| It is necessary to avoid | Exposure to dust, grease |
| Oil and any other material | That may reduce adhesion |
| Between the connector and the mortar for | To avoid breakage, it is necessary |
| Pay particular attention | During transport, the |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Bond metal, plastic and concrete with joints that withstand loads and stresses.
Bond threaded rods and sleeves into the hole for heavy-duty fixings in concrete and masonry.
Spread, smooth and finish mortars, renders, adhesives and skim coats by hand.
For safety
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.





