KimiaCement mortar for concrete Betonfix FB KimiaCode Betonfix FB
Restore degraded concrete without sagging, even on vertical surfaces and overhead.
All Kimia products
A.R. glass fibre structural mesh Kimitech Wallmesh MR-HD Kimia
Key features
- ModelKimitech WALLMESH MR-HD
- LineKimitech
- Made in Italy100% Italian production
- Grammage (g/m²)255
- Mesh size38 x 38 mm
- Fibre density2,68 g/cm3
What it is
A.R. glass fibre structural mesh Kimitech Wallmesh MR-HD Kimia. Key specifications: model Kimitech WALLMESH MR-HD, line Kimitech, made in Italy 100% Italian production.
FRP and FRCM structural strengthening is a system of fibre fabrics, meshes and connectors, applied with resins or mortars, that increases the strength of beams, columns and masonry.
What it is for
Used for strengthening masonry and concrete structures and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Strengthening must be carried out to a design by a qualified engineer. Remove render and deteriorated material, repair the substrate and apply the primer; then apply the first coat of resin or mortar, lay the fabric or mesh taut and free of air bubbles and cover it with the second coat. Insert the connectors into clean holes filled with resin; handle resins and primers with gloves and safety glasses.
Where it is used
- Industrial construction
- Conservation and restoration
- Renovation
Technical data
- Model: Kimitech WALLMESH MR-HD
- Line: Kimitech
- Made in Italy: 100% Italian production
- Grammage (g/m²): 255
- Mesh size: 38 x 38 mm
- Fibre density: 2,68 g/cm3
- Percentage of AR glass fibre by weight: 84 %
- Percentage of AR glass fibre by volume: 68 %
- No. of bars per metre: Warp 26, weft 26
- Warp 910 MPa: Weft: 532 MPa
- Warp 28: Weft: 2.7 %
- Average elastic modulus of the impregnated mesh: 26 GPa
- Average between 32 gpa warp and 20 gpa weft: Unit strength per unit width of mesh
- Warp 759 kN/m: Weft: 72.9 KN/m
Who it is for
Designed for formwork carpenters, bricklayers and restorers.
Related products
- Preformed A.R. structural glass-fibre mesh Kimitech Wallmesh Corner HD Kimia
- A.R. glass fibre structural mesh Kimitech Wallmesh HR-HD Kimia
- Fibre-reinforced thixotropic cement mortar Betonfix RCA Kimia — from the category Fibre-Reinforced Thixotropic Cement Mortars
- American-type stainless steel float, Co.Me Spa — from the category Trowels, Spatulas and Floats
- Two-part epoxy resin in cartridges Kimitech Epoxy CTR Kimia — from the category Chemical Anchors
- Browse the whole category: FRP and FRCM Structural Strengthening Systems
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 23
| Model | Kimitech WALLMESH MR-HD |
|---|---|
| Line | Kimitech |
| Made in Italy | 100% Italian production |
| Grammage (g/m²) | 255 |
| Mesh size | 38 x 38 mm |
| Fibre density | 2,68 g/cm3 |
| Percentage of AR glass fibre by weight | 84 % |
| Percentage of AR glass fibre by volume | 68 % |
| No. of bars per metre | Warp 26, weft 26 |
| Warp 910 MPa | Weft: 532 MPa |
| Warp 28 | Weft: 2.7 % |
| Average elastic modulus of the impregnated mesh | 26 GPa |
| Average between 32 gpa warp and 20 gpa weft | Unit strength per unit width of mesh |
| Warp 759 kN/m | Weft: 72.9 KN/m |
| Equivalent thickness | Warp: 0.08346 mm |
| Weft 0137 mm | Resistant cross-section |
| Warp 8346 mm²/m | Weft: 137.02 mm2/m |
| Knot strength | Warp: 0.13 kN |
| Weft 008 kn | Breaking load, single wire |
| Warp 292 kN | Weft: 2.8 kN |
| Humidity resistance after 1000 hours | Residue > 85% |
| Salt-spray resistance after 1000 hours | Residue > 85% |
| Residue 85 | Glass transition temperature Tg of the mesh |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
KimiaTwo-part liquid epoxy resin, medium viscosity, Kimitech E...
Bond metal, plastic and concrete with joints that withstand loads and stresses.
KimiaTwo-part vinyl ester resin in cartridges Kimitech Vinyl C...Code Kimitech VINYL CTR
Bond threaded rods and sleeves into the hole for heavy-duty fixings in concrete and masonry.
MassRound-nose fibre trowel MassCode cazzuole-fibra-mass
Spread, smooth and finish mortars, renders, adhesives and skim coats by hand.
For safety
PortwestGlove with reinforced latex thumb, Grip 10 (Pk12), Portwe...Code A106
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.